Everbuild Silicone Eater Silicone Sealant Remover - 100ml (Box of 12) 
Bond It Patio Blaster - Clear 2.5L 
FloPlast Square Line Stop End Outlet Black – 114mm x 65mm 
Siroflex Contractors Lead Sheet Silicone - Grey 300ml 
Everbuild 404 Fungicidal Wash – 1 Litre 
Estwing Roofers Pick Smooth Face Hammer - 21oz 
Roofer Doofer – The Ultimate Roofing Tool 
Code 8 Cast Lead - 180mm x 3m 
Timco Mixed Cable Clips 
Everbuild Stixall Extreme Power - Clear 290ml (Box of 12) 
Everbuild Multi-Purpose Wood Filler - 250ml Dark Oak 
Code 7 Cast Lead - 760mm x 3m 
Easy-Trim Lead R Flashing Smooth – 150mm x 5m 
Code 6 Cast Lead - 914mm x 3m 
Hambleside Danelaw Double Plain Tile Vent, TV10/9 - Antique Red (Box of 5) 
Bond It Aluminium Foil Tape - 50mm x 45M 
Everbuild Exact Gap Foam - 750ml 
Code 5 Cast Lead - 150mm x 3m 
Timco Flat Wood Bit Set 
Everbuild Firefoam B2 Gun Grade - Pink 750ml 
Soudal Grip ALL Solvent-Free - White 290ml (Box of 12) 
Bond It B3 Fill And Fix Expanding Foam Gun Grade - Beige 750ml 
Uses
The Silicone Eater by Everbuild is an exceptionally powerful and handy product for removing old silicone-based sealants. This product is formulated using robust polymers that combat the silicone composite, deconstructing them and allowing easily water-based clean-up to remove them entirely. This product is suitable for various surfaces, with some proving more compatible than others, so a preliminary test is always recommended.
Preparation
Start by cleaning the surfaces, removing any impurities that can hinder this product's abilities, which include dust. After removing contaminants, strip and remove as much sealant as possible and then protect surrounding areas with impervious masking tape.
Application
- Cut the top of the cartridge, taking care not to damage the threaded screw.
- Cut the nozzle at a 45° angle and screw it onto the cartridge.
- Place the cartridge into a compatible sealant applicator tool.
- Extrude the material onto the sealant, allowing 2-4 hours for it to de-bond it.
- Four hours is the maximum it can sit on the sealant, so at the 4-hour mark, wipe it all away; if there is a left-over sealant, apply it again.
Limitation and Notes
- Complete a preliminary compatibility test before commencing the full application
- This product has a powerful composite, which can harm sensitive surfaces.
