Everbuild Heavy Duty Multi-Use Wonder Wipes Tub (75 Wipes) 
ALM Code 6 Milled Lead Flashing - 240mm x 6m 
ALM Code 3 Milled Lead - 240mm x 6m 
Everbuild 501 PVA - 1 Litre 
Code 5 Cast Lead - 390mm x 3m 
Everbuild Stixall Extreme Power - White 290ml (Box of 12) 
Code 6 Cast Lead - 210mm x 3m 
Everbuild P18 Gas Leak Detector - 400ml (Box of 12) 
Timco Lithium EP2 Grease - 400g 
Everbuild Everflex Premium 145 Butyl Rubber Sealant - Grey 300ml 
Ronseal One Coat Stain Block - White 750ml 
ALM Code 7 Milled Lead - 1000mm x 3m 
Code 3 Cast Lead - 914mm x 3m 
Ronseal Stays White 2in1 Paint & Primer - Gloss 2.5L 
Timco FirmaHold Collated Brad A2 Stainless Steel Nails - 16G x 50mm (2000 Pieces) 
Bond It Cover-It Hardfloor & Glass Protector - Blue 625mm X 25M 
Ronseal Crystal Clear Outdoor Varnish - Matt 750ml 
Soudal Parquet & Timber Sealant - Dark Grey 290ml 
Soudal Trade Gun and Foam Cleaner - 500ml 
ALM Code 4 Milled Lead - 850mm x 3m 
Everbuild Pinkgrip Dryfix FR – 750ml 
Uses
Stick2 All Purpose Clear Adhesive by Everbuild is excellent for bonding various surfaces together, and it can be used for most common household surfaces. However, it also includes;
- Ceramics
- Porcelain
- Wood
- Card
- Paper
- Most Plastics
- Leather
- Cork
- Linoleum
- Rubber
- Stone
- Glass
- Metals
- Dense fabric
Preparation
Ensure you prepare the surface before application; this is to optimise adhesion. Complete this by removing contaminants that can hinder the adhesion, such as dust, oil, grease etc.
Application
Porous Surface:
- Unscrew the cap and spread a thin, even adhesive layer onto one of the surfaces.
- Bring the surfaces together and hold them firmly.
Non-Porous Surface:
- Improve adhesion by abrading both surfaces with sandpaper
- Unscrew the cap and spread a thin, even layer of adhesive onto both surfaces
- Allow adhesive to dry to a tough tacky finish (5 - 10 minutes), then press firmly on both surfaces.
With both types of surfaces, the full strength of this adhesive is achieved within 24 hours with the temperature at 20°C
Limitations
- Will not stick polyethene, polypropylene or PTFE
- This product is not suitable for bonding acetate, rayon or items which contain a hot fluid
- Do not use this product near polish or some painted surfaces
- Do not apply this product to an area which is immersed in water
- This product is unsuitable for bitumen, asphalt, or cellulose-painted surfaces.
