Hambleside Danelaw TV15/7 Tile Vent - Black (Box of 5) 
Youngman Spacemaker Loft Ladder (30234000) 
Soudal PVCu Solvent Frame Cleaner - 1L 
Code 5 Cast Lead - 180mm x 3m 
Ronseal Multi Purpose Smooth Finish Filler - 1.2kg + 50% Free 
Timco Aluminium Hawk 
ALM Code 5 Milled Lead - 240mm x 3m 
Everbuild 209 Liquid Mortar Tone - Black 1 Litre 
Bond It Aerosol Spray Adhesive 500ml Beige - Box of 12 
Everbuild Pinkgrip SF Solvent Free Adhesive – 380ml 
Ox Tools OX Pro Aviation Snips With Holster - Left Cut (Red) 
Everbuild 503 SBR Bond – 2.5 Litre 
Everbuild 709 FebFlor Floor-Flex Plus - 5 Litre 
Everbuild Jumbo Mitre Fast Kit (Box of 6) 
Bond It Contractors PVA - 1L White 
Code 7 Cast Lead - 150mm x 3m 
Freeflow Square Gutter System Gutter 135° Angle - White 
Everflex Premium+ 450 Builders Silicone – Grey 300ml (Box of 25) 
Permavent Black Breather Membrane – 1m x 20m 
Timloc 3014C Over Fascia Ventilation System 1M - Black 
Everbuild 501 PVA - 2.5 Litre 
Everflex Contract AC50 Acoustic Sealant & Adhesive - White 900ml (Box of 12) 
Soudal Roof & Gutter Sealant – Black 290ml 
ALM Code 6 Milled Lead Flashing - 914mm x 3m 
Right Hand Klober Contract Dry Verge Unit Brown 
Klober Dry Ridge System, 6m (KR5200) 
Timloc Double Roman Tile Vent Red (Box of 6) 
Bond It Mega Foam Gun/Aerosol PU Expanding Foam - Beige 750ml 
Everbuild Stixall Extreme Power - Brown 290ml (Box of 12) 
Code 4 Cast Lead - 800mm x 3m 
Restec GRPROOF 1010 Base Coat Resin - 20kg 
ALM Code 7 Milled Lead - 150mm x 6m 
Hambleside Danelaw Felt Lap Vent 
Bond It Contractors PVA - 5L White 
Soudal Window & Door Expanding Foam - Genius Gun Max 600ml Champagne 
Uses
Stick2 All Purpose Clear Adhesive by Everbuild is excellent for bonding various surfaces together, and it can be used for most common household surfaces. However, it also includes;
- Ceramics
- Porcelain
- Wood
- Card
- Paper
- Most Plastics
- Leather
- Cork
- Linoleum
- Rubber
- Stone
- Glass
- Metals
- Dense fabric
Preparation
Ensure you prepare the surface before application; this is to optimise adhesion. Complete this by removing contaminants that can hinder the adhesion, such as dust, oil, grease etc.
Application
Porous Surface:
- Unscrew the cap and spread a thin, even adhesive layer onto one of the surfaces.Â
- Bring the surfaces together and hold them firmly.
Non-Porous Surface:
- Improve adhesion by abrading both surfaces with sandpaper
- Unscrew the cap and spread a thin, even layer of adhesive onto both surfaces
- Allow adhesive to dry to a tough tacky finish (5 - 10 minutes), then press firmly on both surfaces.
With both types of surfaces, the full strength of this adhesive is achieved within 24 hours with the temperature at 20°C
Limitations
- Will not stick polyethene, polypropylene or PTFE
- This product is not suitable for bonding acetate, rayon or items which contain a hot fluid
- Do not use this product near polish or some painted surfaces
- Do not apply this product to an area which is immersed in water
- This product is unsuitable for bitumen, asphalt, or cellulose-painted surfaces.
