Soudal Fix ALL Turbo - White 290ml (Box of 12) 
Everbuild Everflex Fire Mate Intumescent Sealant – 295ml 
ALM Code 6 Milled Lead Flashing- 1000mm x 6m 
Timco Chalk Line Set 
OX Tools OX Trade Hickory Handle Claw Hammer - 16oz/450g 
Samac Copper Wire Coil 36m x 2mm 
OX Pro Jab Saw - 6.5" / 165mm & Holster Pack 
Everbuild PVCu Solvent Cleaner – 1 Litre 
Freeflow Square Gutter System Running Outlet - Black 
Everbuild Black Jack 902 Bitumen & Flashing Primer – 5 Litre 
OX Tools 14 inch / 350mm Pro Stainless Steel Plasterers Mud Pan 
ALM Code 8 Milled Lead - 240mm x 6m 
Everbuild 501 PVA – 500ml 
Everbuild Black Jack 901 Black Bitumen Paint – 5 Litre 
Code 7 Cast Lead - 240mm x 3m 
Soudal Neutral Stay Fresh Sanitary Silicone Sealant – Clear 300ml (Box of 12) 
Bond It B3 Fill And Fix Expanding Foam Aerosol - Beige 500ml 
ALM Code 3 Milled Lead - 300mm x 3m 
Easy Prime Porcelain Prime Slurry - 15kg 
Code 5 Cast Lead - 210mm x 6m 
Timco Square Twist Nails - Galvanised (40 x 3.75mm) 1kg 
Bond It Aluminium Foil Tape - 100mm x 45M (Box of 12) 
Uses
The Stick2 Superglue GP by Everbuild is ideal for perfectly fitting surfaces that need to be bonded, with its curing time of only 10-15 seconds. It offers small but effective gap-filling properties suitable for up to 0.1mm and is a convenient single-component adhesive. It's an environmentally friendly alternative glue, and this is due to its economical usage alongside its solvent-free composite. Surfaces that this product is excellent for bonding include;
- Plastics
- Metals
- PVCu
- EPDM
Preparation
Surfaces to be bonded must be cleaned, dry and free from contaminants that can hinder the adhesion, such as dirt, dust, oil, grease, etc. To avoid chilling glue lines, store surfaces in a warm environment before bonding, and when commencing the application, ensure there's a relative humidity of 50%+
Application
Unscrew the cap of the product
Squeeze the product to one surface only
Press the surface and hold them together for at least 10 seconds, taking care with the aligning as the open time is short.
Limitations and Notes
- This product should be used in applications that are constantly immersed in water.
- Ensure the surfaces are degreased before bonding
- Ensure surfaces are close fitting as it doesn't bridge gaps
- Do not use on surfaces or products that are bitumen or tar-leaching
