Code 4 Cast Lead - 800mm x 6m 
Ronseal Stays White Ultra Tough White Matt Paint - 2.5L 
Everbuild EuroScrim Plasterboard Tape – 48mm x 90m 
Timco 30mm Cladding Pin - 250 Pieces 
Timco Twin-Threaded Woodscrew Mixed Tray 
Everbuild Lumberjack Wood Preserver – Clear 1 Litre 
FloPlast Square Line Pipe Connector White 
Isoflex Clean Up Fluid - 500ml 
Evo-Stik Tile & Grout Adhesives - White 3kg 
Hambleside Danelaw Double Roman Tile Vent, TV15/3 - Terracotta (Box of 5) 
Hambleside Danelaw (HD PCA) Tile Vent Adaptor for TV10 range 
ALM Code 7 Milled Lead - 180mm x 6m 
Code 7 Cast Lead - 210mm x 3m 
Code 6 Cast Lead - 240mm x 3m 
Ronseal Exterior Yacht Varnish - Satin 250ml 
SEAL PRO, Low Modulus Hybrid Universal Sanitary Sealant & Adhesive Bond, White - EU3 
Timloc Plastic Insulation Retaining Discs - 80mm Red 
Everbuild Firefoam B2 Gun Grade - Pink 750ml 
ALM Code 8 Milled Lead - 180mm x 3m 
OX Pro Small Trowel - 200 x 75mm 
OX Tools 600/1200/1800mm Pro Spirit Level Set with Bag 
Bond It Aluminium Foil Tape - 75mm x 45M (Box of 16) 
Everbuild Everflex 200 Contractors LMA Silicone - Brown 295ml 
Soudal Insulating Foam Genius Gun 750ml - Champagne (Box of 12) 
Chesterfelt Polyester Reinforced Shed Roofing Felt - Green 10m x 1m 
Lead Flexi Slate Pipe Flashing - Flat 
Ulti-Mate Stonewold MkII Roof Tile Vent - Brown 
OX Tools Pro Torpedo Level, 9" / 230mm 
Hambleside Danelaw Double Pantile Vent TV15/2 - Antique Red (Box of 5) 
Permavent Easy Slate 600 - Box of 100 
Everbuild PVCu Acti-Spray – Clear 200ml (Box of 12) 
The Stixall Extreme Power by Everbuild is the ultimate bonding product, perfect for adhesion and sealing, making the versatility of this product unmatched. Due to its unique, high-quality formula, the surfaces and applications of this product are endless, with surfaces suitable for applications such as;
- Metals
- Most Plastics
- Glass
- Concrete
- Plaster
- Plasterboard
- Polyester
- Perspex
- Wood
- Enamel
- Painted surface
- Plus more!
Preparation
With correct preparation, you can achieve optimal results, so it's essential to complete it first before completing the application. To prepare the surface, remove any small debris and clean the area, ensuring no contaminants are present, such as dirt, dust, grease, etc, which can interfere with the adhesion. After removing any impurities, dry the surface, and once it's completely dry, you can start the application.
Application
- Cut the top of the cartridge to the required width, ensuring you do not damage the threaded screw.
- Screw the nozzle onto the top of the cartridge, and fit the cartridge into a standard applicator tool/gun.
- Apply the tip of the gun to the area, apply a firm, even pressure and continue it until you've finished; avoid stopping and starting. You should use a zig-zag motion for adhesive application and, for sealing or pointing applications, a continuous bead along the gap.
Limitations
- You should complete preliminary tests with paints before completing the whole application, as certain paints are unsuitable.
- If the application is overhead and heavy applications, mechanical fixings should be used to support the adhesive.
- Discolouration may occur after prolonged exposure to high UV. However, this doesn't affect the adhesive properties.
- If the application area is predominately dark, you may experience yellowing.
- This product is not suitable for glazing systems or aquarium manufacturing.
- Do not use on surfaces that bleed oils or plasticizers, and it is also unsuitable for application with bitumen or asphalt.
- Certified as a sealant for internal use only.
