ALM Code 6 Milled Lead Flashing - 1000mm x 3m 
Leadax Lead Free Flashing Alternative 150mm (6m rolls) 
Everbuild Maximum Torque - White 290ml (Box of 12) 
Gorilla Glue - Dark Brown 1L 
Everbuild Tarmac Restorer - 5 Litre 
Ronseal Diamond Hard Floor Paint - Anthracite Satin 750ml 
Roughneck® V-Series Axe - 20oz/0.6kg 
ALM Code 8 Milled Lead - 1600mm x 3m 
Cromar Black Bitumen Paint - 5 Litre 
D4 Wood Adhesive – 1 Litre 
Code 5 Cast Lead - 360mm x 3m 
Soudal Swipex Wipes - 100 Wipes (Box of 6) 
Code 6 Cast Lead - 800mm x 6m 
Timco FirmaHold Collated Brad A2 Stainless Steel Nails - 16G x 50mm (2000 Pieces) 
Everbuild All Purpose Ready Mixed Filler - 1kg 
Everbuild Multi-Stick Adhesive - White 350ml 
Everbuild Lumberjack 5 Minute Polyurethane Wood Adhesive Liquid – 750ml (Box of 12) 
Everbuild Triple Action Wood Treatment – 1 Litre 
Bond It PVA & Adhesive Sealer White 500ml - Box of 20 
Bond It Contractors Grade PVA - White 500ml 
Bond It AS900 Acoustic Sealant - White 900ml 
Everbuild Everflex Lead Mate Sealant Grey - 295ml (Box of 25) 
Everbuild Everflex Pyro Mate Fire Rated Silicone – White 295ml (Box of 12) 
FloPlast Round 92½° Bend - White 
Everbuild Constructa-Pro Adhesive Foam - Grey 750ml 
Uses
The Triple Action Wood Treatment by Everbuild is the ultimate wood-treating product on the market. It is crafted to cater to both wood treatment and preservation in one can, using a low-odour solution based on micro-fine technology with added fungicides, algaecides and permethrin. This formula actively combats wood rot, decay, and kills fungi and wood-boring insects. The applications areas this product is typically applied include;
- Sheds and garages
- Fencing and farm buildings
- Roof beams and joists
- Garden furniture
- Floorboards
- Window frames and doors
Preparation
Prepare the application area by ensuring that it's clean and free from paint varnish, stain, grease, bark or other impurities. You can apply this product to a damp surface. Any decay present must be removed and replaced with a sound, treated timber.
Application
- Shake well before use.
- Apply by using either a brush, spray or dipping.
- After the first coat has dried, you should apply a second,
- It is important to pay attention and to soak the end grains thoroughly; for optimal protection, dip it for at least 3 minutes.
Limitations
- Do not dilute this product, as it is ready to use
- This should not be applied to surfaces that food is prepared on
- Avoid contact with bitumen, roofing felt or plastics
- External timbers must be overcoated to reduce environmental impact
- You should use coarse rather than fine mist generators
- This should only be used as specified, as a surface biocide and wood preservative.
