Everbuild Opti-Mix Mortar Plasticiser - 1 Litre (Box of 12) 
Soudal Silicone Sealant Remover, Clear - 100ml 
Stanley Dynagrip Chisel Knife - 25mm 
Ronseal Ultra Tough Hardglaze Clear Varnish - 250ml 
Soudal Adhesive Remover - 400ml 
ERidge Dry Fix Ridge System Black – 6m Kit 
Code 5 Cast Lead - 1200mm x 3m 
Code 6 Cast Lead - 180mm x 6m 
SikaFlex EBT+ Polyurethane Adhesive & Sealant, Grey - 300ml (Box of 12) 
Everbuild 209 Liquid Mortar Tone - Black 1 Litre 
Ronseal Precision Finish Brush - 5 Pack 
Soudal B1 Fire Class Expanding Foam Handheld - 750ml 
Timco Flat Wood Bit Set 
Timloc Underlay Felt Lap Vent 
OX Pro Impact Bit Set - 11 Piece 
Klober Universal Tile Vent Antique Red KG9854 (Box of 10) 
Soudal Soudalead PB Lead Sealant - Grey 300ml (Box of 12) 
Everbuild 501 PVA - 1 Litre 
Ronseal Expanding Foam Filler - 300ml 
Code 7 Cast Lead - 300mm x 3m 
OX Pro Semi Round Dutch Pin, Swivel Arm - 4 Pack 
ALM Code 8 Milled Lead - 510mm x 6m 
FloPlast Half Round Gutter 90° Bend, Brown – 112mm 
Ronseal Stays White 2in1 Paint & Primer - Satin 750ml 
FrogTape® Multi-Surface Masking Tape - Green 36mm x 41.1m 
Soudal Neutral Stay Fresh Sanitary Silicone Sealant – White 300ml 
Everbuild Salt-Away Salt Remover – 5 Litre 
Uses
The Triple Action Wood Treatment by Everbuild is the ultimate wood-treating product on the market. It is crafted to cater to both wood treatment and preservation simultaneously, using a low-odour solution based on micro-fine technology with added fungicides, algaecides and Permethrin. This formula actively combats wet rot, dry rot, and kills fungi and wood-boring insects. The applications areas this product is typically applied include;
- Sheds and garages
- Fencing and farm buildings
- Roof beams and joists
- Garden furniture
- Floorboards
- Window frames and doors
Preparation
Prepare the application area by ensuring that it's clean and free from paint varnish, stain, grease, bark or other impurities. You can apply this product to a damp surface. Any decay present must be removed and replaced with a sound, treated timber.
Application
- Shake well before use.
- Apply by using either a brush, spray or dipping.
- After the first coat has dried, you should apply a second,
- It is important to pay attention and to soak the end grains thoroughly; for optimal protection, dip the end grains for at least 3 minutes.
Limitations
- Do not dilute this product, as it is ready to use
- This should not be applied to surfaces that food is prepared on
- Avoid contact with bitumen, roofing felt or plastics
- External timbers must be overcoated to reduce environmental impact
- You should use coarse rather than fine mist generators
- This should only be used as specified, as a surface biocide and wood preservative.
