Bond It Monster Scrim Drywall Tape - White 48mm x 90m 
ALM Code 4 Milled Lead - 850mm x 3m 
Soudal Genius Gun Gap Filling and Expanding Foam - 500ml 
Soudal Sealant Remover – 400ml 
FloPlast Half Round Fascia Bracket, White – 112mm 
Timloc Standard Roof Tile Vent Adaptor 
Everbuild Jumbo Mitre Fast Kit (Box of 6) 
Cromar Black Bitumen Paint – 2.5 Litre 
Soudal Pro 40P PU Wood Adhesive - 750g 
Everbuild Overlap & Border Adhesive - White 250g 
Timloc Universal Slate Roof Vent PVC Pipe Only 
ALM Code 7 Milled Lead - 850mm x 3m 
Ronseal Exterior Yacht Varnish - Gloss 250ml 
Bond It PVA & Adhesive Sealer - White 5L 
Soudal Decorators Caulk – White 290ml (Box of 24) 
Hambleside Danelaw Single Pantile Roof Tile Vent, TV10/8 - Antique Red (Box of 5) 
Bond It Bitumen Primer - Black 1L 
Soudal Soudabond 265 Classic Spray - 500ml 
OX Pro Chalk Refill, Red - 226g 
Everbuild 5 Minute Polyurethane Wood Adhesive Gel - 310ml (Box of 12) 
Code 6 Cast Lead - 210mm x 6m 
Bond It Mega Foam Gun/Aerosol PU Expanding Foam - Beige 750ml 
Everbuild Black Jack 903 Bitumen Trowel Mastic – 5 Litre 
Ronseal Crystal Clear Outdoor Varnish - Satin 250ml 
Uses
The Triple Action Wood Treatment by Everbuild is the ultimate wood-treating product on the market. It is crafted to cater to both wood treatment and preservation simultaneously, using a low-odour solution based on micro-fine technology with added fungicides, algaecides and Permethrin. This formula actively combats wet rot, dry rot, and kills fungi and wood-boring insects. The applications areas this product is typically applied include;
- Sheds and garages
- Fencing and farm buildings
- Roof beams and joists
- Garden furniture
- Floorboards
- Window frames and doors
Preparation
Prepare the application area by ensuring that it's clean and free from paint varnish, stain, grease, bark or other impurities. You can apply this product to a damp surface. Any decay present must be removed and replaced with a sound, treated timber.
Application
- Shake well before use.
- Apply by using either a brush, spray or dipping.
- After the first coat has dried, you should apply a second,
- It is important to pay attention and to soak the end grains thoroughly; for optimal protection, dip the end grains for at least 3 minutes.
Limitations
- Do not dilute this product, as it is ready to use
- This should not be applied to surfaces that food is prepared on
- Avoid contact with bitumen, roofing felt or plastics
- External timbers must be overcoated to reduce environmental impact
- You should use coarse rather than fine mist generators
- This should only be used as specified, as a surface biocide and wood preservative.
