OX Pro Mini Round Point Shovel 
OX Pro Heavy Duty Wrecking Bar - 24" 
Everbuild External Frame Sealant - Grey 290ml (Box of 12) 
Bond It Bitumen Paint - Black 2.5L 
Soudal Soudafoam Hand Held One Shot - 150ml 
ALM Code 5 Milled Lead - 914mm x 3m 
YBS SuperQuilt Lite Multi-Layer Quilted Foil Insulation, 1.5m x 10m 
Spax Magnetic Bit Holder - 1 Piece 
Soudal Brake Cleaner - 400ml 
Code 7 Cast Lead - 210mm x 6m 
Evo-Stik Roof & Gutter Sealant - Black 290ml 
Everbuild 503 SBR Bond – 2.5 Litre 
Code 3 Cast Lead - 450mm x 3m 
Code 4 Cast Lead - 390mm x 3m 
Soudal Pro 30D Waterproof Wood Adhesive - 750g 
Everbuild Aquaseal Liquid Roof – Slate Grey 7kg 
Hambleside Danelaw TV15/7 Tile Vent - Brown (Box of 5) 
Siroflex PVCu Trim & Mitre Cutter 
Thompson's Stain Block Damp Seal - White 750ml 
Everbuild EB25 Ultimate Sealant & Adhesive – Black 300ml (Box of 12) 
Siroflex Trade Clearbond Adhesive Internal Use - Clear 290ml 
Hambleside Danelaw TV15/4 Tile Vent - Brown (Box of 5) 
Timco Mixed Hose Clips 
Bostik Flexacryl Instant Repair Waterproofing - Grey 5kg 
Bond It Cyanoacrylate Superglue Medium Viscosity, Clear - 20g 
FloPlast Half Round Internal Stop End, White – 112mm 
Restec Flexitec 2020 Roofing Kit - (10m²) 
Ronseal Crystal Clear Outdoor Varnish - Matt 250ml 
Klober Thin Line Vent - Black KG9855-3-0450 (Box of 10) 
OX Spectrum Trade XL Mortar Raking Diamond Blade 115/22.23mm 
Uses
Wood Stain Satin by Everbuild is an excellent wood staining product with a formula specially designed to offer rejuvenation, protection and a flawless finish. This product is ideally used on a surface that a smooth planed timber. It doesn't apply well to rough surfaces. The typical areas of applications for Everbuild Wood Stain Satin include;
- Door Frames
- Window Frames
- Architectural timber
- Conservatories
- Cladding
- Garden Furniture
Preparation
Ensure you properly prepare the surface before applying and remove dust, dirt and similar contaminants. Any rough areas or edges must be smoothed down to allow optimal application, and any varnish or paint present must be sanded and stripped away.
Application
- Stir the product well before using it.
- Using a brush, apply the wood stain following the wood grain to optimise the varnish's colour.
- Apply 3 coats altogether, giving 4 hours between each coat. Before completing the final coat, lightly sand the surface, as this will provide a key for the final coat.
- Always apply the stain to a wet edge, working systematically across the surface, keeping the wet edge moving together as much as possible. After applying to the area, the finished appearance will be improved by feather brushing over the entire area with an unloaded brush, taking care to follow the wood grain.
Limitations
- The colour swatch label is an indication of the wood stain colour. Always test the colour in an inconspicuous area before completing the entire project.
- Do not use it on wood floors or decking.
- Protect from frost, do not apply below 10°C
- In high ambient temperatures or direct sunlight, you may not be able to maintain a wet edge which could lead to a poor finish.
- Ensure exterior wood/timber is treated with a non-repellent wood preservative before application, especially in areas subject to weathering.
