ALM Code 8 Milled Lead - 760mm x 3m 
Soudal Trade Gun and Foam Cleaner - 500ml 
Everbuild Black Jack 904 Roof Felt Adhesive – 2.5 Litre 
ALM Code 6 Milled Lead Flashing - 450mm x 6m 
Everbuild Showerproof Bathroom Silicone - Clear 280ml (Box of 12) 
Ronseal Ultimate Finish Interior Floor Pad Kit 
Bond It All Weather Roofing Compound - Black 2.5L 
Code 6 Cast Lead - 180mm x 6m 
Code 8 Cast Lead - 600mm x 3m 
OX Tuff Carbon Marking Pencil Value Pack 
Everbuild Jetcem Plaster Rapid Repair – 6kg 
OX Trade Plastic Speed Rafters Square Set 
Ronseal One Coat Stays White Radiator Paint - Matt 750ml 
ALM Code 3 Milled Lead - 1200mm x 3m 
Ronseal Stays White Ultra Tough White Matt Paint - 750ML 
Code 7 Cast Lead - 850mm x 3m 
Bond It 5 Minute PU Wood Gel Translucent 300ml - Box of 12 
Timloc Castellated Tile Vent Terracotta (Box of 8) 
SikaFlex 221 Adhesive & Sealant - Black 300ml (Box of 12) 
Hambleside Danelaw Double Pantile Vent TV15/2 - Terracotta (Box of 5) 
Cast Lead Dome Set (Lead Dots) - Pack of 20 
Timloc Interlocking Plain Tile Vent Grey (Box of 12) 
Bond It B3 Fill And Fix Expanding Foam Aerosol - Beige 750ml 
Everbuild Pinkgrip Dryfix FR – 750ml 
Over Fascia Vent, 10mm 
Bond It Aerosol Spray Adhesive - 500ml Beige 
Gorilla Glue - Dark Brown 1L 
FloPlast Half Round Union Unit - White 
Everbuild Pro Fill - Light Grey 500g 
The Everflex 450 Builders Silicone by Everbuild is a fantastic, versatile silicone sealant that offers outstanding adhesion to various surfaces. Suitable not only for perimeter pointing but also for bonding two surfaces and filling expansion joints, it is an all-in-one product. Other unique features of this product are its ability to seal soft metals, general glazing sealing and draughtproofing.
Preparation
It's essential to correctly prepare the area for application before starting. Otherwise, you risk not having optimal results. You should clean the surface by removing any contaminants that can hinder the adhesion, including impurities such as dirt, dust, oil, grease, etc.
Application
- Cut the top of the cartridge, ensuring you do not damage the threaded screw.
- Cut the top of the nozzle at a 45° angle and screw it onto the top of the cartridge.
- Place the cartridge into the standard sealant gun/applicator.
- For perimeter pointing, you should apply an even, continuous pressure along the gap. When bonding two surfaces, you should cover one surface with a zig-zag motion using the silicone and bring them together.
Limitations
- You should not use this product in conjunction with bitumen, asphalt, neoprene and certain organic elastomers
- This product is unsuitable to be used for aquarium manufacturing
- Substrates that bleed oils or plasticisers shouldn't have contact with this product
- This product is not suitable for paints to be applied over, nor is it applicable as a mirror adhesive.
