Everbuild Stick2 Superglue De-Bonder - 20ml 
Bond It Cyanoacrylate Superglue Hi Viscosity - Clear 50g 
Ronseal Diamond Hard Floor Wax - Natural Oak 2.5L 
Bond It Contractors PVA - 25L White 
Everbuild Febond PVA - 5L 
Code 8 Cast Lead - 210mm x 3m 
Soudal 30 Min D4 Gel PU Wood Adhesive Trade - 290ml 
Everbuild Tecnic Foil Pack Gun 
Code 7 Cast Lead - 760mm x 3m 
Sika AnchorFix®-1 Fast Cure Anchoring Adhesive System - Light Grey 300ml 
Timloc Universal Slate Roof Vent Pipe Adaptor Kit 
Everbuild Bath & Kitchen Sealant – White 290ml 
Code 4 Cast Lead - 914mm x 6m 
ALM Code 8 Milled Lead - 914mm x 6m 
Soudal Genius Gun Building Adhesive 750ml - Champagne (Box of 12) 
Klober Profile-Line Flat Tile Vent - Antique Red KG9856-3-0116 (Box of 10) 
Everbuild EB25 Ultimate Sealant & Adhesive – Grey 300ml (Box of 12) 
FloPlast Half Round Downpipe 112° Bend, Black 
BORA - PM-4550 Adjustable Speedhorse XT 
Code 5 Cast Lead - 600mm x 3m 
Thompson's One Coat Patio & Block Paving Seal - 5L 
Everbuild Constructa-Pro Adhesive Foam - Grey 750ml 
Everbuild Wood Adhesive 502 – 500ml 
Siroflex Trade Clearbond Adhesive Internal Use - Clear 290ml 
Uses
Evo-Stik Gripfill Extra Multi-purpose by Bostik is a one-part adhesive with an initial grab that is extremely strong, allowing for a robust, secure application. Suitable for application in various locations, including inside and out, this product doesn't resist different weathering or other adhesives; therefore, any external application would require the bond to be protected. Some of the substrates that this product will adhere to include the following;
- Wood
- Hardboard
- Plywood
- Ceramics
- Concrete
- Metal
- PVC
- GRP
- Plasterboard
Preparation
Before commencing the application, properly prepare the surface to ensure optimal adhesion. Remove contaminants that can hinder the adhesion, including dirt, dust, oil, grease, loose material, etc. Any paints that may come into contact with the adhesive must be removed, and metal surfaces should be degreased. New concrete and plaster should be allowed to dry thoroughly, and porous surfaces such as plaster and fibre cement boards should be primed.
Application
- Cut the top of the cartridge, ensuring you do not damage the threaded screw.
- Screw the nozzle onto the cartridge, cutting it at a 45° angle
- Using an applicator gun, apply the adhesive in a zig-zag motion with a bead of 6mm
- On larger areas, cover the surface around the edge and across the panel at 400mm intervals
- Bring the two surfaces together with a twisting motion to achieve optimal adhesion.
Limitations
- This product is unsuitable for applications where water contact is possible.
- This product is suitable for external application; however, if water touches it, it will interfere with the bonding.
