Bond It Trowel Mastic - Black 2.5L 
FloPlast Half Round Union Unit - White 
Everbuild Everflex Lead Mate Sealant Grey - 295ml (Box of 25) 
Ronseal's EGC Hardener BPO - 30g 
Bond It Pro-Mate LMA Silicone - Translucent EU3 
ALM Code 5 Milled Lead - 180mm x 6m 
Code 5 Cast Lead - 450mm x 3m 
Ronseal Stays White Ultra Tough White Satin Paint - 2.5L 
Everbuild Lumberjack 5 Minute PU Wood Adhesive Gel – 310ml 
Klober Boll Roll Tile Vent KG6085, Brown 
ALM Code 8 Milled Lead - 800mm x 6m 
Timco FirmaHold Collated Clipped Head Nails - Gun Nails (3.1mm x 90mm) 
Siroflex Trade Superglue Activator Spray - 200ml 
OX Pro Pool Trowel, Rigid 450MM / 18" 
Ronseal Exterior Yacht Varnish - Gloss 1L 
Code 8 Cast Lead - 1000mm x 3m 
Timco 5 x 8m Heavy Duty Tarpaulin, Green 
Everbuild Flexible Decorators Filler – White 290ml 
Everbuild Stixall Extreme Power – Brown 290ml 
Ronseal Diamond Hard Floor Wax - Natural Oak 2.5L 
Bond It Dustproof & Hardener - Clear 5L 
Ronseal Stays White 2in1 Paint & Primer - Matt 750ml 
Everbuild Pro Blue Masking Tape - 25mm x 33mm 
Bond It Multi-Wipes Spray - Clear 1L 
SikaFlex 221 Adhesive & Sealant - Black 300ml (Box of 12) 
Uses
Impact Adhesive by Evo-Stik offers outstanding adhesive properties, with its ability to instantly grab onto a surface, this product immediately binds surfaces and takes only 24 hours to reach its full strength. Despite the instant grab from the product, there is still an open time for movement between 20 - 60 minutes, depending on the temperature. Most glues cannot bind more challenging surfaces, such as non-porous and metal substrates, but this product can achieve full-strength adhesion. Some of the surfaces that this product is suitable for include;
- Wood
- MDF
- Laminate
- Metal
- PVC
- Cork
- Leather
- Rubber
- Glass
- Mirror
- Stone
- Ceramics
Preparation
Surfaces should be prepared before commencing the application to ensure optimal adhesion is achieved. This includes removing contaminants that can hinder the adhesion, such as dirt, dust, oil, grease and similar impurities.
Application
- Using a standard spreader, spatula or paintbrush
- Apply a thin coat of adhesive onto one of the surface
- Bring the surfaces together, holding them firmly together for a few minutes to allow the bond to form
- Leave the surfaces bonded together for a total of 24 hours to enable optimal adhesion to be achieved
Limitations
- This product is unsuitable for application on polystyrene, cellulose paint, vinyl, polythene, polypropylene and rayon fabrics. Always test in a small, inconspicuous area before completing the project if you need more clarification.
