ALM Code 4 Milled Lead - 510mm x 3m 
Bostik Builder Tape, 50mm - 25m 
Everbuild Everflex 200 Contractors LMA Silicone - Transparent 295ml (Box of 25) 
ALM Code 6 Milled Lead Flashing - 1600mm x 6m 
Everbuild Jumbo Mitre Fast Kit (Box of 6) 
Timco Screwdriver 4-Tool Set 
Everbuild Stixall Extreme Power - Grey 290ml (Box of 12) 
OX Pro Brick Trowel Philadelphia Pattern - 10"/250mm 
Ulti-Mate 110/110mm Flexipipe 
Armatool Leather Pouch & Leather Belt 
Klober Double Roman Roof Tile Vent - Terracotta KG9857-3-0152 (Box of 10) 
Code 7 Cast Lead - 180mm x 3m 
Easy-Trim Hip Support Tray Accessory Kit 
Siroflex Painters Caulk-It - 310ml 
Azpects EASYSeal Sandstone Enhancer and Sealer 5L 
FloPlast Half Round Stop End Outlet, White – 112mm 
Bond It Professional Foam Gun Applicator 1M 
Everbuild Stixall Extreme Power – Black 290ml 
FloPlast Square Line Internal Stop End White – 114mm 
Siroflex Heavy Duty PVCu Solvent Cleaner - 1L 
Bond It Dec-Mate Flexible Filler - Magnolia EU3 
Ronseal Stays White One Coat Non-Drip Paint - Matt 2.5L 
Bond It Incredibond Solvent Free Adhesive - White 310ml 
Timloc Felt Support Tray 600mm 
Bostik Brushable Waterproofer - Black 5L 
Siroflex PVCu Trim & Mitre Cutter 
Everbuild Wet Rot Wood Hardener – 250ml 
Uses
The Evo-Stik Waterproof Wall Tile Adhesive is fantastic for adhering to multiple substrates around the house. The Evo-Stik scientist specifically crafted this formula to stick to ceramic tiles; with a ready-mixed formula, you can apply this to the back of the tile and put it onto the wall in seconds. Some of the substrates this product can adhere to include;
- Plaster
- Plasterboard
- Glazed Tiles
- Brick
- Tile backer boards
- Cement renders
Preparation
Ensure the surfaces are even, dry, clean and grease-free, and any gaps or cracks are filled. If the application area is tiles, ensure they're clean and re-fixed where loose. Remove wallpaper and score paint using coarse sandpaper. New brickwork or plaster must allow four weeks to dry; ensure plaster is primed before application, giving it 1 hour to dry.
Application
- Using a trowel or spreader, apply the ready mixed wall tile adhesive onto the wall, maintaining a depth of 3mm throughout.
- Fix tiles onto the walls within 20 minutes of applying the adhesive, using a twisting action to securely bind the two surfaces together.
- Allow up to 24 hours for the adhesive to cure fully; a non-porous surface will take up to 48 hours.
