Timloc Telescopic Underfloor Vent 5-7 Courses 
Hedgehog Gutterbrush Clips (Pack of 20) 
Soudal Trade Sanitary Silicone - White 290ml (Box of 12) 
Soudal B2 Fire & Acoustic Expanding Foam – 750ml (Box of 12) 
ALM Code 8 Milled Lead - 800mm x 3m 
OX Pro Impact Drill & Drive Accessory Set - 40 Piece 
Klober Thin Line Vent - Slate Grey KG9855-3-0429 (Box of 10) 
Ronseal One Coat Stays White Radiator Paint - Satin 250ml 
Freeflow Square Gutter System Gutter 135° Angle - White 
Timloc 5" Aero Core with Cowl & Baffle Terracotta 
Ronseal Trade 10Yr Woodstain Satin Walnut 750ml Brown 
Timco M6 Zip-Fix Cavity Wall Fixings - 10 Pieces 
Ronseal Ultra Tough Satincoat Clear Varnish - 2.5L 
Everbuild Tecnic Foil Pack Gun 
Soudal Decorators Caulk White – 290ml 
Code 4 Cast Lead - 850mm x 3m 
Soudal Trade Gun and Foam Cleaner - 500ml 
FloPlast Square Union Unit - Black 
Everflex Premium+ 450 Builders Silicone – White 300ml (Box of 25) 
Uses
The Evo-Stik Waterproof Wall Tile Adhesive is fantastic for adhering to multiple substrates around the house. The Evo-Stik scientist specifically crafted this formula to stick to ceramic tiles; with a ready-mixed formula, you can apply this to the back of the tile and put it onto the wall in seconds. Some of the substrates this product can adhere to include;
- Plaster
- Plasterboard
- Glazed Tiles
- Brick
- Tile backer boards
- Cement renders
Preparation
Ensure the surfaces are even, dry, clean and grease-free, and any gaps or cracks are filled. If the application area is tiles, ensure they're clean and re-fixed where loose. Remove wallpaper and score paint using coarse sandpaper. New brickwork or plaster must allow four weeks to dry; ensure plaster is primed before application, giving it 1 hour to dry.
Application
- Using a trowel or spreader, apply the ready mixed wall tile adhesive onto the wall, maintaining a depth of 3mm throughout.
- Fix tiles onto the walls within 20 minutes of applying the adhesive, using a twisting action to securely bind the two surfaces together.
- Allow up to 24 hours for the adhesive to cure fully; a non-porous surface will take up to 48 hours.
