Freeflow 68mm Round Down Pipe Shoe - White 
Gorilla Super Glue Gel Twin Pack - Clear 3g 
ALM Code 4 Milled Lead - 180mm x 6m 
Ronseal Exterior Yacht Varnish - Gloss 500ml 
ALM Code 3 Milled Lead - 210mm x 6m 
Everbuild Everflex Premium 145 Butyl Rubber Sealant - Grey 300ml 
Roofer Doofer – The Ultimate Roofing Tool 
Timco Pozi C2 Strong-Fix Twin Cut Screws - 4.0mm x 40mm (Box of 200) 
ALM Code 8 Milled Lead - 1600mm x 6m 
Everbuild Febond PVA - 1L 
Bond It Aerosol Spray Adhesive - 500ml Beige 
Code 7 Cast Lead - 1200mm x 6m 
Hambleside Danelaw TV15/7 Tile Vent - Antique Red (Box of 5) 
Samac Aluminium Annular Ring Nails - 1kg (38mm x 3.35mm) 
Bond It Sealant Applicator Tool 
Code 6 Cast Lead - 300mm x 6m 
OX Trade 14 Drive Socket Set - 35 Piece 
Siroflex Trade High Viscosity Superglue - 20g 
Everbuild Bath & Kitchen Sealant - 200ml 
Ronseal Anti-Condensation Paint - Matt White 750ml 
Timloc Plain Tile Vent Terracotta (Box of 14) 
BOND IT Power Mix Concentrated Liquid Mortar Plasticiser - 500ml Brown 
Uses
The Evo-Stik Waterproof Wall Tile Adhesive is fantastic for adhering to multiple substrates around the house. The Evo-Stik scientist specifically crafted this formula to stick to ceramic tiles; with a ready-mixed formula, you can apply this to the back of the tile and put it onto the wall in seconds. Some of the substrates this product can adhere to include;
- Plaster
- Plasterboard
- Glazed Tiles
- Brick
- Tile backer boards
- Cement renders
Preparation
Ensure the surfaces are even, dry, clean and grease-free, and any gaps or cracks are filled. If the application area is tiles, ensure they're clean and re-fixed where loose. Remove wallpaper and score paint using coarse sandpaper. New brickwork or plaster must allow four weeks to dry; ensure plaster is primed before application, giving it 1 hour to dry.
Application
- Using a trowel or spreader, apply the ready mixed wall tile adhesive onto the wall, maintaining a depth of 3mm throughout.
- Fix tiles onto the walls within 20 minutes of applying the adhesive, using a twisting action to securely bind the two surfaces together.
- Allow up to 24 hours for the adhesive to cure fully; a non-porous surface will take up to 48 hours.
