Freeflow 114mm Square Gutter Fascia Bracket - White 
Everbuild 5 Minute Polyurethane Wood Adhesive Gel - 310ml (Box of 12) 
Evo-Stik Roof & Gutter Sealant - Black 290ml 
ALM Code 7 Milled Lead - 850mm x 3m 
Bond It Aerosol Spray Adhesive - 500ml Beige 
Code 5 Cast Lead - 1000mm x 3m 
Easy-Trim Hall Clips, Bag of 50 
Thompson's uPVC Restorer - 480ml 
Sika Mould Buster – 5 Litre 
Everbuild Multi-Stick Adhesive - White 350ml 
Ronseal Ultra Tough Hardglaze Clear Varnish - 750ml 
Bond It Frame-Mate Door & Window Sealant - White EU3 
Bond It Stain Block - 400ml Off White 
Everbuild Black Jack 901 Black Bitumen Paint – 25 Litre 
Soudal Lead Sheet Sealant 290ml - Grey (Box of 12) 
Everbuild Anchorset Green 300 - Grey 300ml (Box of 12) 
Everbuild Salt-Away Sprayable Salt Remover – 1 Litre 
Everbuild Stixall Extreme Power – Grey 290ml 
Bond It Bitumen Primer - Black 2.5L 
Everbuild Everflex Premium+ 500 Bath & Sanitary Silicone - White 295ml (Box of 25) 
IKO 5U Eaves Protection Strips - 16m x 330mm 
Thompson's Patio & Block Paving Seal - Wet Look 5L 
Timco Mixed Carriage Bolts, Nuts and Washers Grab Pack 
Bond It Mirror Pro Adhesive - White EU3 
Bond It Mega Stik PU Adhesive - Beige 750ml 
Bond It PVCu Solvent Free Cream Cleaner - White 1L 
Everbuild 405 Path & Patio Seal – 5 Litre 
Bond It PVA & Adhesive Sealer - White 5L 
Ronseal Fence Life Brush - 4" 
Uses
The Evo-Stik Waterproof Wall Tile Adhesive is fantastic for adhering to multiple substrates around the house. The Evo-Stik scientist specifically crafted this formula to stick to ceramic tiles; with a ready-mixed formula, you can apply this to the back of the tile and put it onto the wall in seconds. Some of the substrates this product can adhere to include;
- Plaster
- Plasterboard
- Glazed Tiles
- Brick
- Tile backer boards
- Cement renders
Preparation
Ensure the surfaces are even, dry, clean and grease-free, and any gaps or cracks are filled. If the application area is tiles, ensure they're clean and re-fixed where loose. Remove wallpaper and score paint using coarse sandpaper. New brickwork or plaster must allow four weeks to dry; ensure plaster is primed before application, giving it 1 hour to dry.
Application
- Using a trowel or spreader, apply the ready mixed wall tile adhesive onto the wall, maintaining a depth of 3mm throughout.
- Fix tiles onto the walls within 20 minutes of applying the adhesive, using a twisting action to securely bind the two surfaces together.
- Allow up to 24 hours for the adhesive to cure fully; a non-porous surface will take up to 48 hours.
