OX Trade Hard Green Carpenters Pencils – Pack of 10 
Bond It Monster Scrim Drywall Tape - White 48mm x 90m 
Bond It Lead Pro Roofing & Flashing Sealant - Grey EU3 
Timco Straight Tower Bolt Black 6" Gate Bolt 
FloPlast Round Line Downpipe Clip, Black 
Copper Coil 20m x 50mm 
Ronseal Ultra Tough Hardglaze Clear Varnish - 250ml 
Everbuild Black Jack 903 Bitumen Trowel Mastic – 5 Litre 
Soudal Soudalead PB Lead Sealant - Grey 300ml (Box of 12) 
12 x Cromar Vent 3 Pro Breathable Membrane 1m x 50m 
OB41 Multi-Use Penetrating Oil Spray - 400ml 
FloPlast Square Line Internal Stop End White – 114mm 
OB1 Grip & Grab Waterproof Adhesive 
Soudal Fix ALL Turbo - Grey 290ml 
FrogTape® Delicate Surface Masking Tape - Yellow 36mm x 41.1m 
Irwin Jack Plus 880 Universal Handsaw - 20" (Pack of 10) 
Gorilla Wood Glue - Brown 236ml 
Timco Hazard Tape 
ALM Code 4 Milled Lead - 300mm x 6m 
Code 5 Cast Lead - 1000mm x 6m 
10 x Timloc 3014C Over Fascia Ventilation System 1M - Black 
Code 4 Cast Lead - 510mm x 3m 
FloPlast Half Round Gutter Angle 135°, Brown – 112mm 
SEAL PRO, Low Modulus Hybrid Universal Sanitary Sealant & Adhesive Bond, White - EU3 
Uses
The Evo-Stik Waterproof Wall Tile Adhesive is fantastic for adhering to multiple substrates around the house. The Evo-Stik scientist specifically crafted this formula to stick to ceramic tiles; with a ready-mixed formula, you can apply this to the back of the tile and put it onto the wall in seconds. Some of the substrates this product can adhere to include;
- Plaster
- Plasterboard
- Glazed Tiles
- Brick
- Tile backer boards
- Cement renders
Preparation
Ensure the surfaces are even, dry, clean and grease-free, and any gaps or cracks are filled. If the application area is tiles, ensure they're clean and re-fixed where loose. Remove wallpaper and score paint using coarse sandpaper. New brickwork or plaster must allow four weeks to dry; ensure plaster is primed before application, giving it 1 hour to dry.
Application
- Using a trowel or spreader, apply the ready mixed wall tile adhesive onto the wall, maintaining a depth of 3mm throughout.
- Fix tiles onto the walls within 20 minutes of applying the adhesive, using a twisting action to securely bind the two surfaces together.
- Allow up to 24 hours for the adhesive to cure fully; a non-porous surface will take up to 48 hours.
