Everbuild Smart Tack Handy – 500ml 
Timco FirmaHold Brad Austenitic Stainless Steel Nails - 16G x 64mm Qty 2000 
FloPlast Square 112° Offset Downpipe - White 
FloPlast Half Round Square Line Gutter Adaptor - Black 
ALM Code 5 Milled Lead - 800mm x 6m 
OB41 Powerful Plastic Cleaner - 400ml 
FloPlast Square Line Internal Stop End White – 114mm 
Klober Profile-Line Limarech Tile Vent - Antique Red KG9859-3-0116 (Box of 10) 
Everbuild Wet Rot Wood Hardener – 250ml 
Everbuild Everflex Contract AC50 Acoustic Sealant & Adhesive - White 900ml 
Everbuild Quick Drying Clear Varnish - Gloss 2.5L 
Everbuild Caulk Once – White 295ml 
Bond It Frame-Mate Door & Window Sealant - Brown EU3 
Timloc Single Pantile Tile Vent Brown (Box of 11) 
Code 4 Cast Lead - 210mm x 3m 
Everbuild Forever Clear Silicone Sealant – 295ml 
Bond It Flash-Mate Lead Sealant - Grey EU3 
Timco Nut Mix Grab Pack - 980 Pieces 
Everbuild EB25 Ultimate Sealant & Adhesive – Grey 300ml (Box of 12) 
Ronseal Stays White One Coat Non-Drip Paint - Matt 750ml 
Ulti-Mate 110/110mm Flexipipe 
Ronseal Ultimate Finish Decking Pad Kit 
Everbuild 502 Wood Adhesive – 5 Litre 
Code 3 Cast Lead - 240mm x 6m 
Bond It Monster Scrim Drywall Tape - White 100mm x 90m 
Ronseal 3 in 1 Basecoat - White 2.5L 
Uses
The Evo-Stik Waterproof Wall Tile Adhesive is fantastic for adhering to multiple substrates around the house. The Evo-Stik scientist specifically crafted this formula to stick to ceramic tiles; with a ready-mixed formula, you can apply this to the back of the tile and put it onto the wall in seconds. Some of the substrates this product can adhere to include;
- Plaster
- Plasterboard
- Glazed Tiles
- Brick
- Tile backer boards
- Cement renders
Preparation
Ensure the surfaces are even, dry, clean and grease-free, and any gaps or cracks are filled. If the application area is tiles, ensure they're clean and re-fixed where loose. Remove wallpaper and score paint using coarse sandpaper. New brickwork or plaster must allow four weeks to dry; ensure plaster is primed before application, giving it 1 hour to dry.
Application
- Using a trowel or spreader, apply the ready mixed wall tile adhesive onto the wall, maintaining a depth of 3mm throughout.
- Fix tiles onto the walls within 20 minutes of applying the adhesive, using a twisting action to securely bind the two surfaces together.
- Allow up to 24 hours for the adhesive to cure fully; a non-porous surface will take up to 48 hours.
