Hambleside Danelaw TV15/7 Tile Vent - Terracotta (Box of 5) 
Everbuild 503 SBR Bond – 5 Litre 
Thompson's One Coat Patio & Block Paving Seal - 5L 
Ronseal Stays White One Coat Non-Drip Paint - Matt 2.5L 
Code 4 Cast Lead - 760mm x 3m 
Ronseal Quick Drying Smooth Finish Filler - 600g 
Bond It Bitumen Primer - Black 2.5L 
Soudal PVCu Gap Filler, White - 300ml 
Code 5 Cast Lead - 150mm x 6m 
Ronseal Ultra Tough Hardglaze Clear Varnish - 250ml 
Timco 5 x 8m Heavy Duty Tarpaulin, Green 
Sika Stone Protector - Clear 5 Litre 
Siroflex Trade Strength Glue Screws SF Adhesive 
Soudal Acetoxy Stay Fresh Sanitary Silicone Sealant – Ice White 290ml 
BORA - PM-4550 Adjustable Speedhorse XT 
Klober Double Pantile Vent - Terracotta KG9858-3-0152 (Box of 10) 
Everbuild Lumberjack® Woodworm Killer - Clear 5L 
Timco Polypropylene Rope - Blue 30m 
Everbuild Triple Action Wood Treatment – 25 Litre 
Bond It Mould Stop - Clear 2.5L 
Everbuild 408 Super Seal - 5 Litre 
ALM Code 7 Milled Lead - 1200mm x 6m 
Soudal Window & Door Expanding Foam - Genius Gun Max 600ml Champagne 
The Gorilla Contact Adhesive Tube is a high-quality adhesive with high-performance bonding strength that outmatches rival contact adhesives. This is due to its ability to provide high-strength bonds whilst still having an open time for repositioning. Compared to conventional contact adhesives, once the surface connects, the adhesive almost locks in, whilst the Gorilla allows time for repositioning.
This glue has exceptional resistance to the elements, resisting water and weathering, making it perfect for exterior applications. Alongside that, you can paint directly over the glue itself, allowing interior home renovation applications.
Preparation
To achieve optimal adhesive results, prepare the surface by cleaning it and removing any contaminants that can hinder the bonding, such as dirt, dust, grease, oil, flaking material, loose debris, etc. After you've cleaned the surface, you should ensure it's dry for the glue.
Application
- Apply the adhesive to each surface you want to bond.
- Â For ultimate bonding strength, allow the adhesive to partly dry for 2 minutes before connecting the surfaces.
- For repositioning, allow the glue to dry partially for about a minute and then connect the surfaces. This will allow between 2 - 4 minutes of repositioning before the adhesive locks in. The time of repositioning can differ depending on the substrate.
