Hambleside Danelaw Single Pantile Roof Tile Vent, TV10/8 - Antique Red (Box of 5) 
Code 8 Cast Lead - 210mm x 3m 
ALM Code 5 Milled Lead - 800mm x 6m 
Everbuild 501 PVA - 5 Litre 
Samac Galvanised ELH Felt Nails - 1kg (13mm x 3.00mm) 
FloPlast Square Gutter 90° Bend - White 
Everbuild Jumbo Mitre Fast Kit Superglue & Activator 
Thompsons One Coat Roof Seal - Black 5L 
ALM Code 8 Milled Lead - 450mm x 3m 
Gorilla Tape - Black (48mm x 32m) 
Everbuild Easi-Squeeze Flexible Decorators Filler - White 200ml 
Everbuild Clear Fix – 290ml (Box of 12) 
OX Pro Harling Trowel - 165mm X 165mm 
Code 5 Cast Lead - 800mm x 6m 
FloPlast Half Round Internal Stop End, Black – 112mm 
Soudal Solvent-Free Trade Grab Adhesive - White 290ml 
Bond It Rubber Bitumen Emulsion - Black 5L 
ALM Code 6 Milled Lead Flashing - 760mm x 3m 
Ronseal Precision Finish Brush - 0.5 Inch 
Everbuild Febond PVA - 1L 
Ronseal 6 Year Anti Mould Paint - White Matt 750ml 
Everbuild Stick2 All Purpose Clear Adhesive - 30ml 
Uses
The Gorilla Glue is an excellent, powerful adhesive perfect for application to various substrates. It is delivered in a small, easy-to-use tube that extrudes a resin that makes contact and instantly begins to cure into an unbreakable bond. Its formula is forged from a polyurethane formula that expands, creating small but excellent gap-filling properties. Its high-strength bond is 100% resistant to water and heat temperatures, making it perfect for interior and exterior applications.
Preparation
Before commencing the application, it's important to prepare the areas to ensure optimal results are achieved. Remove any contaminants on the surface that can hinder adhesion, including dirt, dust, grease, oil, organic growth, loose debris, flaking material, etc.
Application
- Due to this product curing upon moisture, you should lightly dampen all surfaces to be bonded with water, ensuring that you don't saturate the surface and do not add it to the glue.
- Apply a thin layer of adhesive to either surface, taking care not to apply it over. The glue, while curing, will expand up to 3-4 times its original size.
- Bring the surfaces together using clamps and hold tight for at least 1-2 hours. If you don't have clamps, placing weighted objects over the surface will help keep it compressed.
- After using the glue, you wipe the bottle's nozzle clean using a dry cloth, squeeze all the air out of the bottle, and secure the lid back on.
