Everbuild Firefoam B2 Gun Grade - Pink 750ml 
Ronseal Expanding Foam Filler - 500ml 
OX Tools OX Trade Hickory Handle Claw Hammer - 16oz/450g 
OX Tools Pro Plasterers' Hawk - 330mm x 330mm 
Ronseal Kitchen & Bathroom Touch-Up Enamel - 10ml 
Soudal Construction Silicone, Clear - 290ml 
Everbuild Stick2 Carpet Fix Spray - 500ml 
Everbuild Jumbo Mitre Fast Kit (Box of 6) 
ALM Code 5 Milled Lead - 914mm x 6m 
Soudal Neutral Stay Fresh Sanitary Silicone Sealant – White 300ml (Box of 12) 
Circular Soffit Vent, Brown 
Code 5 Cast Lead - 1000mm x 3m 
Everbuild Everflex Premium+ 565 Clean Room Silicone – White 295ml 
Soudafoam Gap Filler Gun Grade – 750ml 
Timco Lifting Sling 3000kg Limit - 3m x 90mm 
OX Tools Drywall Rasp 250mm 
Everbuild EuroScrim Plasterboard Tape – 100mm x 90m 
Everbuild 402 Waterseal – 5 Litre 
Soudal Gun & Foam Cleaner Gun Grade - 500ml 
Soudal Acetoxy Stay Fresh Sanitary Silicone Sealant – Ice White 290ml 
FloPlast Half Round Gutter 135° - White 
Samac Silicone Bronze Nails - 1kg (45mm x 1.8mm) 
Bond It Duct Tape - Silver 48mm x 45M 
Everbuild Stick2 Spray Contact Adhesive – Beige 500ml 
Timco Heavy-Duty Tarpaulin - 2m x 3m 
Everbuild Lumberjack 5 Minute Polyurethane Wood Adhesive Liquid – 750ml 
Uses
The Gorilla Super Glue Gel Twin Pack is a powerful, potent glue that's supplied in a small tube but designed for more challenging, tougher jobs. Its formula is powerful enough for horizontal and vertical applications, with a 10-15 second curing time! The bottle is fitted with an anti-clog cap, allowing multiple product uses. Its overall formula has a high performance, and in addition, it can withstand drops and impacts.
Preparation
To achieve optimal results, you should prepare the surface by removing any impurities that can hinder the adhesion, including dirt, dust, grease, oil, loose debris, flaking material, etc. After cleaning the surface, you should ensure it's dry before bonding.
Application
- To puncture the seal on the tube, tighten the white nozzle firmly.
- Apply a small amount of adhesive to one of the surfaces, ensuring you only place one drop per 6.5cm². Ensure you don't over-apply the adhesive, as this can cause delayed curing and, in some instances, failed adhesion.
- Press the surfaces together for 10-45 seconds, and after that time, allow 24 hours for the bond to cure fully.
