FloPlast Ogee Fascia Bracket, White 
Cromar Vent 3 Light Breathable Membrane - 1m x 25m 
ALM Code 3 Milled Lead - 1600mm x 6m 
Timloc Plain Tile Vent Red (Box of 14) 
Everbuild Standard Nozzle - 6 Pack (290mm & 310mm) 
OX Pro Dry Wall Hammer - 14 oz 
ALM Code 5 Milled Lead - 210mm x 3m 
Sika Stone Protector - Clear 5 Litre 
Soudal Genius Gun Soudafoam Window and Door - 600ml 
Everbuild Forever Clear Silicone Sealant – 295ml (Box of 12) 
Timco Twin-Threaded Woodscrew Mixed Tray 
Ronseal Stays White One Coat Non-Drip Paint - Gloss 2.5L 
Everbuild Overlap & Border Adhesive - White 250g 
ALM Code 7 Milled Lead - 1600mm x 6m 
Everbuild Dual Purpose Foam Cleaner – 500ml 
42 x ERidge Dry Fix Ridge System Black – 6m Kit 
Thompson's Stain Block Damp Seal - White 250ml 
Bond It Rubber Bitumen Emulsion - Black 5L 
Code 8 Cast Lead - 914mm x 6m 
Lead Roofing Wood Core Roll (50mm x 2.4m) 
Bond It PVCu Solvent Fast Acting Cleaner - Clear 1L 
Ronseal Precision Finish Brush - 5 Pack 
Bond It Economy Sealant Gun - Blue 900ml 
Bond It Rubber Bitumen Emulsion - Black 25L 
Uses
The Gorilla Super Glue Gel Twin Pack is a powerful, potent glue that's supplied in a small tube but designed for more challenging, tougher jobs. Its formula is powerful enough for horizontal and vertical applications, with a 10-15 second curing time! The bottle is fitted with an anti-clog cap, allowing multiple product uses. Its overall formula has a high performance, and in addition, it can withstand drops and impacts.
Preparation
To achieve optimal results, you should prepare the surface by removing any impurities that can hinder the adhesion, including dirt, dust, grease, oil, loose debris, flaking material, etc. After cleaning the surface, you should ensure it's dry before bonding.
Application
- To puncture the seal on the tube, tighten the white nozzle firmly.
- Apply a small amount of adhesive to one of the surfaces, ensuring you only place one drop per 6.5cm². Ensure you don't over-apply the adhesive, as this can cause delayed curing and, in some instances, failed adhesion.
- Press the surfaces together for 10-45 seconds, and after that time, allow 24 hours for the bond to cure fully.
