Ronseal Exterior Multi-Purpose Smooth Finish Filler - Grey 330g 
Timco Lithium EP2 Grease - 400g 
Soudal Roof & Gutter Sealant – Black 290ml 
Soudal Trade Gun Grade Expanding Foam - 750ml (Box of 12) 
Thompson's uPVC Restorer - 480ml 
ALM Code 4 Milled Lead - 800mm x 6m 
Soudal Repair Express Plaster - White 900ml 
Everbuild Tarmac Restorer - 5 Litre 
Klober Flexipipe 75/100mm - (KG972400) 
Hambleside Danelaw TV15/4 Tile Vent - Slate Grey (Box of 5) 
Bond It Bitumen Paint - Black 1L 
Ulti-Mate Forticrete SL8 Grey Tile Vent 
Cromar Black Bitumen Paint – 2.5 Litre 
Everbuild Power Pro Sealant Gun - C4 (290ml - 400ml) 
Code 7 Cast Lead - 800mm x 3m 
Everbuild Mammoth Barrier Tape - Red/White (72mm x 500m) 
Freeflow 112mm Gutter Internal Stop End - Black 
Everbuild Silicone Eater Silicone Sealant Remover - 100ml 
Everbuild Anchorset Green 300 - Grey 300ml (Box of 12) 
Timco M6 Zip-Fix Cavity Wall Fixings - 10 Pieces 
Bostik Penetration Primer For Roofs, Black - 5 Litre 
Hambleside Danelaw Single Pantile Roof Tile Vent, TV10/8 - Black (Box of 5) 
Bond It Flash-Mate Lead Sealant - Grey EU3 
Restec CSM Fibreglass Roll 450g/m² - (15m² Roll) 
Ronseal One Coat Damp Seal - White 250ml 
Pro Magnetic Combination Square - 300mm 
FloPlast Half Round Running Outlet, White 
Everbuild Superflow Sealant Gun - C3 (290ml - 310ml) 
Uses
The Gorilla Wood Glue is a powerful, versatile adhesive that's perfect for application to wooden substrates. It provides an unbreakable bond with excellent water resistance, rated to D3. It's applied similarly to a conventional PVA adhesive but instead is formulated with Gorilla's strength. The glue cures into a natural colour, enabling aesthetically pleasing finishes as it blends naturally with the wood.
Preparation
To ensure that you achieve optimal results, you must clean and prepare the surfaces, removing contaminants such as dirt, dust, grease, oil, loose debris, flaking material, etc. After cleaning and removing the impurities from the surface, ensure it's dried and ready for bonding. If the Wood Glue has separated inside the bottle, shake thoroughly to remix the material.
Application
- Apply the glue to the surface generously.
- Bring the surfaces together and hold for at least 20-30 minutes using clamps or weighted objects.
- Any excess glue before it's cured can be removed using a clean, damp cloth; if the glue has cured, you'll need to scrape it off.
