Samac Aluminium Clout Nails - 55mm x 3.35mm (1kg) 
Soudal Silirub 2, White - 300ml 
Soudal Fix ALL Flexi – Black 290ml (Box of 12) 
Code 5 Cast Lead - 760mm x 3m 
Code 7 Cast Lead - 510mm x 6m 
Soudal Trade PU Construction Adhesive - Beige 290ml 
Siroflex Contractors PVCu Silicone - Clear 300ml 
Right Hand Klober Contract Dry Verge Unit Brown 
ALM Code 4 Milled Lead - 150mm x 6m 
Everbuild Jumbo Mitre Fast Kit Superglue & Activator 
Hambleside Danelaw (HD DPCSPA) Tile Vent Adaptor and Flexi for TV10 Range 
Klober Double Roman Roof Tile Vent - Brown KG9857-3-0247 (Box of 10) 
Thompson's One Coat Patio & Block Paving Seal - 5L 
Code 3 Cast Lead - 760mm x 3m 
Everbuild Everflex Premium 145 Butyl Rubber Sealant - Grey 300ml (Box of 12) 
Bond It Duct Tape - Silver 48mm x 45M 
Bond It Mould Stop - Clear 1L 
ALM Code 3 Milled Lead - 914mm x 6m 
Roughneck® V-Series Axe - 20oz/0.6kg 
Soudal Grip ALL Solvent-Free - White 290ml 
Everbuild Salt-Away Sprayable Salt Remover – 1 Litre 
Hambleside Danelaw Double Plain Tile Vent, TV10/9 - Slate Grey (Box of 5) 
The Profile-Line Limarech Tile Vent is the go-to tile vent for exceptional airflow to concrete interlocking roof tile profiles. This product can achieve the must-have solution to damp roof spaces, functional airflow and ventilation, allowing the attic to breathe. If you don't treat condensation and moisture issues, you may experience further structural issues in the future.
You can use this product not only for attic ventilation but also for soil and mechanical extraction; a must-have for some rooms, especially soil extraction, as this aids the pressure in the toilet system. The installation of this product is easily completed by experienced roofers, with the design sleek and once fitted, flush, discreet and virtually impossible to see. It only weighs less than a Kilogram, allowing easy transport to the site and to the roof, it also makes installing a lot easier.
Installing Klober Limarech Tile Vent
Place the Limarech Tile Vent over the existing tile you want to replace and create a rectangle marking of 120 x 180mm wide. Make a star cut from opposing corners, folding back the four tabs upwards, ensuring the top one is secured to the batten above. You can then place the Tile Vent securely into position using the fixing clips underneath the roof tile's left-hand interlock.
