Bond It Mould Stop - Clear 1L 
Code 8 Cast Lead - 1000mm x 3m 
Siroflex Trade Strength Medium Viscosity Superglue - 20g 
Code 7 Cast Lead - 390mm x 3m 
Everbuild Jetcem Deep Rapid Repair Sand & Cement – 2kg 
Ronseal Diamond Hard Floor Varnish - Clear Matt 5L 
84 x Eridge Dry Fix Ridge System Black - 6M Kit 
Everbuild External Frame Sealant - White 290ml (Box of 12) 
Hambleside Danelaw TV15/1 Flush Fitting Tile Vent - Antique Red (Box of 5) 
ALM Code 3 Milled Lead - 1200mm x 3m 
ALM Code 6 Milled Lead Flashing - 1600mm x 6m 
ALM Code 7 Milled Lead - 600mm x 3m 
Code 6 Cast Lead - 510mm x 6m 
Code 4 Cast Lead - 600mm x 6m 
FloPlast Universal Hopper, Black – 65-68mm 
Everbuild 404 Fungicidal Wash – 5 Litre 
Timco Velocity Premium Multi-Use Screws - Mixed Tray 
OB1 Diamond Crystal Clear Universal Sealant & Adhesive 290ml 
Everbuild 502 Wood Adhesive – 1 Litre 
Everbuild Firefoam B2 Gun Grade - Pink 750ml 
ALM Code 5 Milled Lead - 210mm x 6m 
Soudal Fix ALL Flexi – Grey 290ml (Box of 12) 
Everbuild Bath & Kitchen Sealant - 200ml 
Ox Tools Waterproof Latex Gloves Size 9 Large 
Sika 1 Waterproofer – 5 Litre 
Klober 15x9 Tile Vent - Slate Grey KG9690-0429 (Box of 10) 
OX Trade Jab Saw - 6.5" / 165mm & Holster Pack 
Hedgehog Gutter Brush Leaf Guard Black – 4m x 125mm 
OX Trade 3 Piece Paint Brush Set - 25/38/50mm 
Everbuild Professional Sealant Gun - C3 (280ml - 310ml) 
Soudal Soudafoam Hand Held One Shot - 150ml (Box of 12) 
Hambleside Danelaw TV15/1 Flush Fitting Tile Vent - Terracotta (Box of 5) 
Everbuild 402 Waterseal – 5 Litre 
Ronseal 10 Year Superflexible Wood Primer & Undercoat is a thick-pigmented, excellent-quality formula that delivers a vibrant colour. Suitable for transforming bold and dark marks into white.
It's ideal for exterior application, it's perfect for smooth wood, and when used in conjunction with Ronseal 10-Year Weatherproof Paint, it offers the ultimate professional finish.
Preparation
Preparing the surface for this product requires you to prepare the wood correctly. If applying this directly to bare wood. You should sand it down slightly using 120-grit sandpaper, working toward the wood grain and smoothing any rough patches.
After sanding the surface, you need to clean it with white spirit and a cloth, and this is to remove any excess sawn dust.
If the surface has been previously painted, you should inspect it, and if the quality is reasonably good, you'll need to sand it down using 120-grit sandpaper slightly, optimising it for the primer
If the surface is of poor quality, you must use the 120 grit sandpaper and remove all the old paint. Until you get to the bare wood. This can be achieved quicker using an electric sander, but ensure you always follow the wood grain. After sanding the surface, you should clean it, removing and sawn dust using white spirit and a cloth.
Application
- Crack open the tin and thoroughly stir it before using it, ensuring no lumps.
- Apply the paint onto the surface using a synthetic paintbrush, brushing toward the wood grain. Wait 4 hours for the first coat to dry.
- Apply a second coat onto the surface, following the wood grain again. Wait another 4 hours for the paint to dry.
- Once the paint has dried, lightly sand the surface using 240 grit sandpaper, thus optimising the surface for the next painting stage.
Aftercare
Due to the nature of the product, it shouldn't be left as a top coat. Once it's dried, you should look to apply the next paint. Any tools that have been used can be cleaned using warm, soapy water.
