Ronseal Quick Drying Radiator Spray Paint - White Satin 400ml 
Everbuild 501 PVA – 500ml 
Siroflex Trade High Viscosity Superglue - 20g 
Ronseal uPVC Paint - Black Satin 2.5L 
Everbuild 501 PVA - 5 Litre 
Everbuild Everflex Contract AC50 Acoustic Sealant & Adhesive - White 380ml 
Bond It Superglue Activator Accelerator Spray Cyanoacrylate Aerosol - 400ml 
Soudal Neutral Stay Fresh Sanitary Silicone Sealant – Clear 300ml 
Estwing Hammer Curved Claw Smooth Face - 20oz 
Soudal Compact Foam Gun PU Foam 
Everbuild Stick2 Carpet Fix Spray - 500ml 
Bond It Pro-Mate LMA Silicone - Translucent EU3 
Ronseal Diamond Hard Floor Paint - Anthracite Satin 750ml 
ALM Code 8 Milled Lead - 850mm x 3m 
Everbuild Black Jack 904 Roof Felt Adhesive – 25 Litre 
Hambleside Danelaw Felt Lap Vent 
Everbuild Caulk Once – White 295ml (Box of 12) 
Cromar Bitumen Trowel Mastic - Black 5L 
Everbuild Multi-Use Monster Wonder Wipes Tub (500 Wipes) 
Everbuild Febond PVA - 2.5L 
Bond It Monster Scrim Drywall Tape - White 48mm x 90m 
Bostik Fast-Tak Permanent Adhesive - 500ml 
Ronseal Ultra Tough Hardglaze Clear Varnish - 250ml 
201 Mortar Admix – 5 Litre 
Uses
The Anti-Condensation Paint by Ronseal is a high-quality, uniquely formulated paint that completely controls condensation, mould, and general damp issues. This paint, when applied, delivers an added layer of insulation, protecting the paint and your wall from unsightly damage. This type of paint is suitable for scrubbing down when cleaning, making it perfect for bathrooms and kitchens.
Preparation
Before commencing the application, you should prepare the surface. Clean it down to remove any contaminants, and if the surface has mould present, use a dedicated mould killer to remove it. You should not sand it away; all this does is spread the pores, which causes it to spread.
Application
- When opening the tin, thoroughly stir it to mix all the pigments.
- Apply the paint directly to the wall using a brush or roller, ensuring you don't spread it too thinly.
- Allow 4 hours for the first coat to dry, then apply a second. The surface will be touch dry in 2 hours but suitable for painting over in 4 hours.
Aftercare
This paint can be used as a top coat or undercoat; if an undercoat is your intention, you should wait 4 hours for it to dry before applying it. Any leftover paint on tools should be removed and cleaned using warm, soapy water.
