10 x Permavent Black Breather Membrane – 1m x 50m 
Code 6 Cast Lead - 150mm x 6m 
Everbuild Stick2 Hard Plastic Adhesive - 30ml 
ALM Code 8 Milled Lead - 240mm x 3m 
Klober Universal Tile Vent Grey KG9854 (Box of 10) 
Code 8 Cast Lead - 760mm x 6m 
Timco 30mm Cladding Pin - 250 Pieces 
Right Hand Klober Uni-Click Dry Verge Units Terracotta 
OX Pro Aluminium Metric Rafters Square - 300mm 
Soudal Gun & Foam Cleaner Gun Grade - 500ml (Box of 12) 
Everbuild Mammoth Clear Weatherproof Tape 
OX Polyzip Flex C2 Cutter - 25mm to 55mm 
Isoflex Clean Up Fluid - 500ml 
Bond It All Weather Roofing Compound - Black 25L 
Bond It Bitumen Primer - Black 5L 
Cromar ProRidge Universal Ridge System 3m Kit 
Sika 1 Waterproofer – 5 Litre 
ALM Code 4 Milled Lead - 240mm x 3m 
Ronseal Exterior Yacht Varnish - Satin 2.5L 
Everbuild General Purpose Silicone - White 280ml (Box of 12) 
Timloc 1204 Underfloor Vent Vertical Extension + 150mm 
FloPlast Round 92½° Bend - Black 
Everbuild Febond PVA - 1L 
Ronseal Crystal Clear Outdoor Varnish is an outstanding product with an innovative formula that delivers excellent sealing properties without changing the colour of the surface. This high-quality varnish seals the surface, providing excellent water-resisting properties and highlighting the natural wood.
Preparation
To ensure an optimal finish on previously stained or varnish wood, you should sand down the surface using 120-grit sandpaper, working in a circular motion to remove any old varnish or stain. After sanding the surface, use white spirit and a cloth to clean the surface from dust.
When applying to new wood, you should lightly sand the surface using 120-grit sandpaper, ensuring there is no imperfection on the surface. After, use white spirit and a cloth to clean the surface of any leftover dust.
Application
- Open the tin and thoroughly stir it, ensuring no lumps are in the varnish
- Using a brush, apply the varnish brushing in the direction of the wood grain
- Allow six hours to pass for the coat to dry
- To achieve optimal results, you should apply three coats, but before applying the final coat, lightly sand the surface
Aftercare
After the varnish has dried, you can maintain the quality of it by cleaning the surface, ensuring that no grime or dirt builds up. Any tools used during the application process can be cleaned using warm, soapy water. If you notice any damage to the surface, lightly sand the surface and apply the varnish to it.
