Bond It Wood Pro High Strength Flexible Hybrid Adhesive - EU3 Buff 
Code 8 Cast Lead - 1600mm x 3m 
Soudal PTFE Spray - 400ml 
Ronseal One Coat Water-Based Tile Paint - Magnolia Satin 750ml 
Samac Half Round Snowguard Bracket - 150mm (6") 
Everbuild Forever White Powder Wall Tile Grout – 1.2kg 
Timco Mixed Hose Clips 
Everbuild Tecnic Silicone 825 – Magnolia 380ml (Box of 25) 
Everbuild Anchorset Green 150 - Grey 150ml 
Everbuild B1 Hand Held Expanding Fire Rated Foam - Pink 750 ml 
Ronseal Quick Drying Radiator Spray Paint - White Gloss 400ml 
Everbuild Febond PVA - 1L 
OB41 Powerful Plastic Cleaner - 400ml 
Everbuild Lumberjack 550 Floor Adhesive – Buff 300ml 
IKO Shed Felt - Green 10m Roll 
Ronseal One Coat Stays White Radiator Paint - Matt 250ml 
Ronseal 6 Year Anti Mould Paint - White Silk 750ml 
Bond It PVA & Adhesive Sealer - White 5L 
Everbuild Everflex AquaMate Aquarium Sealant – Translucent 295ml (Box of 12) 
ALM Code 5 Milled Lead - 180mm x 6m 
Everbuild P45 Foam Applicator Gun 
Bond It Trowel Mastic - Black 2.5L 
The Ronseal Diamond Hard Doorstep Paint - Black Satin 250ml is the go-to choice for anyone looking to bring life and colour to their front door. This thick pigmented paint delivers a vibrant, long-lasting colour that's resistant to various scuffs, knocks and scratches. Ideal for novice D.I.Yers or tradespeople, this product is easy to apply directly from the tin.
Preparation
You must apply this on a dry day when the temperature is above 10°C. Brush your steps thoroughly, removing leaves, moss and twigs, ensuring that it's just a plain substrate using warm, soapy water to wash the surface.
If they have been previously painted, use a wire brush to remove any loose flaking paint, then apply white spirit to clean the surface. Afterwards, ensure the surface is dry before commencing the application.
Application
- Open the tin of paint and thoroughly stir it, making sure all the pigments are mixed.
- Using a brush, apply the first coat to the surface and allow four to six hours for the paint to dry, then apply the second coat.
- Allow another four to six hours for the second coat to dry; you can walk over it once it has.
- After 24 hours, the surface will be completely hard and dry, and the diamond-hard protection will activate.
Aftercare
Looking after the surface is easy, ensuring no loose debris, e.g. twigs, sticks, leaves, or moss growing.
