Ronseal One Coat Water-Based Tile Paint - Cobalt Grey Gloss 750ml 
Timco Firmahold Hammer Tacker 
Bond It 30 Minute PU Wood Adhesive - Brown 750g 
Siroflex Painters Caulk-It - 380ml 
Bond It Expanding Foam Cleaning Fluid - Clear 500ml 
Timco Flat Wood Bit Set 
Timco Grouting Float 
Thompson's Patio & Block Paving Seal - Wet Look 5L 
Thompson's Stain Block Damp Seal - White 250ml 
Thompson's uPVC Restorer - 480ml 
Ronseal Precision Finish Brush - 5 Pack 
Samac Stainless Steel Cladding Pins - 30mm x 2.0mm (Box of 250) 
OX Trade 4 Piece Spirit Level Set - 230, 600, 1200 & 1800mm 
Code 7 Cast Lead - 150mm x 3m 
Bond It Contractors PVA - 2.5L White 
ALM Code 5 Milled Lead - 150mm x 6m 
Timco Hazard Tape 
Thompson's One Coat Waterseal - 5L 
Uses
The Interior Wax by Ronseal is a high-quality wax that allows even the most novice of D.I.Yers to exceed at applying this product due to its easy-to-apply application. It has a unique drying time of only 20 minutes, allowing you to complete all three coats within a couple of hours. Offering a coverage of up to 16m² per litre, you can effectively stain an object with just one 750ml tin.
Preparation
Remove any present old wax, grease or oil using White Spirit and a cloth. After that, you should lightly sand the surface to an even finish using 120-grit sandpaper, wiping away any dust that settles after you've sanded. Leave the surface to dry before waxing.
Application
- Due to the liquidity of the wax, you should thoroughly stir it to even out any lumps that may have built
- Apply the first coat, using a brush stroking in the direction of the grain. Give it 1 hour to fully dry
- For optimal results, apply three coats. Note that the final coat will only take 20 minutes to dry.
Aftercare
Due to the natural diamond-hard nature of the wax, spillages will be hard to clean up but can be done, but only if dealt with immediately.
