ALM Code 8 Milled Lead - 600mm x 6m 
Soudal Repair Express Plaster - White 250ml 
Soudal Butyrub Non-Setting Mastic - Black 300ml 
OX Trade Stubby Level - 100mm 
Everbuild Seal Rite Strip / Smooth Out Twin Pack 
Easy-Trim Hall Clips, Bag of 50 
Code 5 Cast Lead - 360mm x 3m 
SikaFlex EBT+ Polyurethane Adhesive & Sealant, White - 300ml (Box of 12) 
Code 3 Cast Lead - 1200mm x 6m 
Code 4 Cast Lead - 600mm x 6m 
Ulti-Mate Stonewold MkII Roof Tile Vent - Brown 
Soudafoam Window & Door Hand Held - 750ml 
Soudal Trade Sanitary Silicone - White 290ml (Box of 12) 
Ronseal Trade Polyurethane Satincoat Varnish - 2.5L 
Thompson's One Coat Damp Seal - White 750ml 
OX Tools Pro Carpenters Square & Angle Finder 300mm / 12in 
Ronseal Diamond Hard Floor Varnish - Clear Matt 2.5L 
Bond It Monster Wipes - White 75 Wipes 
Klober Plain Roof Tile Vent Adaptor - KG990500 
Timco Collated Drywall Self Drilling Screws 
ALM Code 3 Milled Lead - 300mm x 6m 
Everbuild Triple Action Wood Treatment – 2.5 Litre 
FloPlast Half Round Downpipe 112° Bend, Black 
Everbuild 502 Wood Adhesive – 5 Litre 
Everbuild Quick Drying Clear Varnish - Gloss 750ml 
Timloc Castellated Tile Vent Terracotta (Box of 8) 
FloPlast Square Line Shoe Black – 65mm 
OB41 Powerful Plastic Cleaner - 400ml 
Everbuild ASBO Graffiti Remover - 400ml (Box of 12) 
Soudal Gap Filler Expanding Foam Genius Gun 300ml - Champagne 
Timco Ratcheting Screwdriver 46-Part Set 
Everbuild Black Jack 908 DPM – 25 Litre 
Armatool Slate Guillotone 
Cromar Cold Gritting Solution - Black 5 Litres 
Uses
The Knot Block Wood Primer and Undercoat by Ronseal offers the perfect product to seal knots from showing. This paint has a thick, white pigment that transforms the knot into a clear white coat, and this coat is perfect for further application due to its natural primer qualities. To achieve full results, you should apply two separate coats onto the knot, giving enough time to dry in between to hide the knot securely.
Preparation
Place dust sheets down over surfaces and objects you don't want the paint to spill onto accidentally. Using 120 grit sandpaper, lightly sand the wood down to an even finish; this aids the paint to adhere to the surface. If there are any loose, peeling or flaking bits on the wood, sand it all down to the bare wood. Let the dust settle and wipe it down using white spirit and a cloth. Any cracks or holes present should be filled with the appropriate filler.
Application
- Stir the tin thoroughly, ensuring you mix the pigments
- Dip your brush into the paint and apply it to the wood, brushing it with the grains of the wood
- Wait 4 hours for the coat to dry
- Apply the second coat, using the same method as the prior, brushing with the wood grains.
- Wait another 4 hours for the paint to dry.
Aftercare
Any excess paint can be cleaned using warm, soapy water. Any damages that may occur over time can be easily repaired by sanding down the area and then applying another two coats to the affected area as you had done prior.
