Bond It Mega Foam Gun/Aerosol PU Expanding Foam - Beige 750ml 
ALM Code 4 Milled Lead - 210mm x 6m 
Oxyturbo Turbo Set 90 Lead Welding & Lead Burning Kit 
Soudal Repair Express Cement – Grey 900ml 
OB41 White Grease Spray - 400ml 
Bulk Pallet 50 Packs of Aluminium Clout Nails, 50 x 3.35 - 10KG (500kg) 
Sika MaxMix Waterproofer - 1 Litre 
OX Trade Stubby Level - 100mm 
Soudal Silirub 2, White - 300ml 
Armatool Slate Rip - Stainless Steel 
ALM Code 8 Milled Lead - 1200mm x 3m 
Code 5 Cast Lead - 800mm x 3m 
Everbuild Lumberjack 5 Minute Wood Adhesive Deal 
Code 3 Cast Lead - 450mm x 3m 
Everbuild Forever Ivory Silicone Sealant – 295ml 
Everbuild P18 Gas Leak Detector - 400ml 
Ronseal Exterior Yacht Varnish - Gloss 2.5L 
FloPlast Round Line Downpipe Clip, Black 
Code 8 Cast Lead - 1200mm x 3m 
ALM Code 3 Milled Lead - 1000mm x 3m 
Isoflex Special Primer - 750ml 
Everbuild Industrial Superglue HV – Clear 20g 
Uses
The Multi-Purpose Powder Smooth Filler by Ronseal delivers excellent, quick internal repairs for various surfaces. Its high-quality formula offers a robust, long-lasting repair supporting gaps up to 40mm. Some of the surfaces that this product is suitable for include;
- Plaster (Internal only)
- Stone (Internal & External)
- Concrete (Internal & External)
- Wood (Internal & External)
Preparation
Before applying, ensure you prepare the surface to optimise the adhesion. To clean the area, wipe it down, removing any dust, grease, dirt and other contaminants that can interfere with the bonding.
Application
- Using the measuring scoop, measure 2 parts filler and mix it with 1 part water.
- Fill the hole using the formula you've created, ensuring you cover all cracks and crevices.
- Smooth it down with a wet knife once you've filled the area, but make sure it bulges out slightly to allow sanding when dry for a smooth, flush finish.
- If the gap is more significant than 40mm, apply in intervals of 40mm, giving a couple of hours to dry between each layer.
- After filling the entire area, give it a couple of hours to dry and then sand it down.
Aftercare
Remove any excess formula on any tools using a damp cloth
