Bond It A70 Studlock Anaerobic High Strength Adhesive - 50ml Green 
Everbuild Stixall Extreme Power – Grey 290ml 
Everbuild 402 Waterseal – 25 Litre 
Armatool Mop Heads Size 12 
Soudal Grip All Solvent-Based - 290ml 
Code 7 Cast Lead - 450mm x 3m 
ALM Code 7 Milled Lead - 210mm x 3m 
Bond It B1 Fire Resistant PU Gun Grade Expanding Foam - Pink 750ml 
Bond It A70 Studlock Anaerobic High Strength Adhesive - 25ml Green 
ALM Code 8 Milled Lead - 1600mm x 3m 
Right Hand Klober Contract Dry Verge Unit Grey 
Freeflow 112mm Gutter Internal Stop End - Black 
Bond It PVA & Adhesive Sealer White 1L - Box of 12 
Bond It Caulk-Mate One Hour Decorators Caulk - White EU4 
Code 5 Cast Lead - 914mm x 6m 
Everbuild Everflex Lead Mate Sealant Grey - 295ml (Box of 25) 
Ronseal 6 Year Anti Mould Paint - White 400ml Aerosol 
Everbuild Lead Mate Patination Oil – 1 Litre 
FloPlast Square 112° Offset Downpipe - White 
ALM Code 3 Milled Lead - 450mm x 6m 
Everbuild 402 Waterseal – 5 Litre 
Code 6 Cast Lead - 1200mm x 6m 
Ronseal Ultra Tough Mattcoat Clear Varnish - 750ml 
Uses
The Multi-Purpose Powder Smooth Filler by Ronseal delivers excellent, quick internal repairs for various surfaces. Its high-quality formula offers a robust, long-lasting repair supporting gaps up to 40mm. Some of the surfaces that this product is suitable for include;
- Plaster (Internal only)
- Stone (Internal & External)
- Concrete (Internal & External)
- Wood (Internal & External)
Preparation
Before applying, ensure you prepare the surface to optimise the adhesion. To clean the area, wipe it down, removing any dust, grease, dirt and other contaminants that can interfere with the bonding.
Application
- Using the measuring scoop, measure 2 parts filler and mix it with 1 part water.
- Fill the hole using the formula you've created, ensuring you cover all cracks and crevices.
- Smooth it down with a wet knife once you've filled the area, but make sure it bulges out slightly to allow sanding when dry for a smooth, flush finish.
- If the gap is more significant than 40mm, apply in intervals of 40mm, giving a couple of hours to dry between each layer.
- After filling the entire area, give it a couple of hours to dry and then sand it down.
Aftercare
Remove any excess formula on any tools using a damp cloth
