Everbuild Stick2 Superglue De-Bonder - 20ml 
Sikabond PVA - White 5 Litre 
Timloc Inline Slate Vent Black 
ALM Code 4 Milled Lead - 450mm x 3m 
Soudal B2 Fire Rated Expanding Foam Gun Grade - 750ml (Box of 12) 
Code 5 Cast Lead - 760mm x 3m 
Ronseal Ultra Tough Mattcoat Clear Varnish - 2.5L 
Everbuild Power Pro Sealant Gun - C4 (290ml - 400ml) 
Timloc Mini Castellated Tile Vent Brown (Box of 14) 
Ronseal Exterior Yacht Varnish - Satin 500ml 
Siroflex Trade Superglue Activator Spray - 400ml 
ALM Code 5 Milled Lead - 510mm x 3m 
Code 4 Cast Lead - 210mm x 6m 
Standard Brush 4-Inch 
Everbuild No Waste Foam – 750ml 
Code 7 Cast Lead - 510mm x 3m 
OX Trade Plastic Speed Rafters Square Set 
Timco Pozi C2 Strong-Fix Twin Cut Screws - 4.0mm x 40mm (Box of 200) 
Hambleside Danelaw Single Pantile Roof Tile Vent, TV10/8 - Terracotta (Box of 5) 
Hambleside Danelaw Double Roman Tile Vent, TV15/3 - Slate Grey (Box of 5) 
Everbuild Exact Gap Foam - 750ml 
ALM Code 7 Milled Lead - 150mm x 6m 
Gorilla Wood Glue - Brown 236ml 
Ronseal Precision Finish Brush - 0.5 Inch 
Code 8 Cast Lead - 210mm x 3m 
OX Pro Double Handle Pool Trowel 
Everbuild Multi-Purpose Wood Filler - 250ml Dark Oak 
ALM Lead Expansion Joint - Code 5 - 260mm x 3m 
Everbuild P11 Central Heating System Cleanser – 1 Litre 
Ronseal Wet Rot Wood Hardener - 750ml 
Bond It All Weather Roofing Compound - Black 2.5L 
Everbuild Stixall Extreme Power – Brown 290ml 
Uses
The Multi-Purpose Powder Smooth Filler by Ronseal delivers excellent, quick internal repairs for various surfaces. Its high-quality formula offers a robust, long-lasting repair supporting gaps up to 40mm. Some of the surfaces that this product is suitable for include;
- Plaster (Internal only)
- Stone (Internal & External)
- Concrete (Internal & External)
- Wood (Internal & External)
Preparation
Before applying, ensure you prepare the surface to optimise the adhesion. To clean the area, wipe it down, removing any dust, grease, dirt and other contaminants that can interfere with the bonding.
Application
- Using the measuring scoop, measure 2 parts filler and mix it with 1 part water.
- Fill the hole using the formula you've created, ensuring you cover all cracks and crevices.
- Smooth it down with a wet knife once you've filled the area, but make sure it bulges out slightly to allow sanding when dry for a smooth, flush finish.
- If the gap is more significant than 40mm, apply in intervals of 40mm, giving a couple of hours to dry between each layer.
- After filling the entire area, give it a couple of hours to dry and then sand it down.
Aftercare
Remove any excess formula on any tools using a damp cloth
