Everbuild General Purpose Silicone - White 280ml (Box of 12) 
Ronseal Exterior Yacht Varnish - Gloss 1L 
Code 4 Cast Lead - 390mm x 6m 
Everbuild 209 Liquid Mortar Tone - Black 5 Litre 
Soudal Lead Sheet Sealant 290ml - Grey 
Code 6 Cast Lead - 150mm x 6m 
ALM Code 5 Milled Lead - 180mm x 3m 
Everbuild One Strike Filler - White 2.5L 
Soudal Butyrub Non-Setting Mastic - Grey 300ml 
Everbuild Silicone Eater Silicone Sealant Remover - 100ml 
Everbuild Everflex Pyro Mate Fire Rated Silicone – White 295ml (Box of 12) 
Bond It PVA & Adhesive Sealer - White 500ml 
Timco Firmahold Hammer Tacker 
ALM Code 3 Milled Lead - 760mm x 3m 
Cromar Cold Gritting Solution - Black 25 Litres 
Ronseal Ultra Tough Mattcoat Clear Varnish - 2.5L 
ALM Code 4 Milled Lead - 600mm x 3m 
Timco Velocity Premium Multi-Use Screws - Mixed Tray 
Bond It Monster Wipes - White 75 Wipes 
Ronseal One Coat Damp Seal - White 250ml 
Timloc Double Pantile Tile Vent Brown (Box of 6) 
Code 3 Cast Lead - 180mm x 6m 
Soudal Trade All Weather Sealant - Clear 290ml (Box of 12) 
YBS SuperQuilt Lite Multi-Layer Quilted Foil Insulation, 1.5m x 10m 
Ronseal uPVC Cleaner - 750ml 
Uses
The One Coat Tile Paint by Ronseal offers high-quality colour and protection to your tiles, delivering a product that can revive old-dated tiles into modern, refreshing ones. All of this is achieved with just one coat, proving how exceptional this product is.
Preparation
Before commencing the application, ensure the room is above 10°C and lay dust sheets over the surface and objects you don't want the paint to spill onto. Use a grout cleaner and perform remedial work for any grout that needs cleaning. After you've done both, you should wipe down the tiles, cleaning them and removing any contaminants that can hinder the paint's adhesion.
Application
- Thoroughly stir the paint, ensuring you mix all the pigments.
- Apply the paint directly to the tile with vertical strokes using a synthetic brush.
- The paint will be touch dry in around an hour, but don't allow water to touch it for 24 hours.
- This product may not cover bold colours in the first coat, and if so, lightly sand the tile using 240-grit paper and paint another coat over it. You should wait 4 hours for the first coat to dry before applying the second.
Aftercare
Remove as much paint from your brush or roller as possible, then wash it using warm, soapy water. Do not empty any leftover paint into drains or water courses. You should also protect this product from frost.
When cleaning the tiles, avoid using abrasive cleaners as they can damage the paint; instead, wash it with soapy water. Avoid water or high humidity coming into contact with the paint while drying.
