ALM Code 5 Milled Lead - 1000mm x 6m 
Code 7 Cast Lead - 300mm x 6m 
Everbuild Everflex Premium+ 500 Bath & Sanitary Silicone - Clear 295ml (Box of 25) 
Bond It SBR Admixture - White 5L 
Timloc Telescopic Underfloor Vent 5-7 Courses 
OX Trade Torpedo Level 230mm / 9in 
OX Pro Top Steady Nail-On (Full Kit) Clamp Set 
OB41 Fast Tack Contact Adhesive Spray - 500ml 
Ronseal One Coat Water-Based Tile Paint - White Satin 750ml 
FloPlast Square Union Unit - White 
Timco Nut Mix Grab Pack - 980 Pieces 
Colron Refined Finishing Wax - 325g 
Ox Tools OX Pro Heavy Duty Sealant Gun - 290ml to 400ml 
Soudal Brake Cleaner - 400ml 
Everbuild Quick Drying Clear Varnish - Satin 250ml 
Timco Round Wire Nails, Pack of 40 
Soudal Repair Express Cement – Grey 900ml 
Klober Double Roman Roof Tile Vent - Slate Grey KG9857-3-0429 (Box of 10) 
Everbuild Evercryl One Coat Grey – 20kg 
Code 5 Cast Lead - 210mm x 3m 
Siroflex Trade Mortar Repair Cement - Grey 300ml 
BORA Centipede 2ft x 4ft x 30in Unit - 4 X-Cups + 2 Clamp + C/S Bag 
Bond It Lightweight Scrim Tape - 48mm x 90m White 
Everbuild Quick Drying Clear Varnish - Gloss 250ml 
Uses
The Wood Preserver by SikaGard is an excellent, high-performance, fast-curing preserver for wood and timber, both internally and externally, with a unique pet and plant-safe formula. Sika's scientists brewed this product with fungicides and algaecides, which finely disperse, allowing deep penetration and, therefore, excellent effectiveness. Another feature is its ability to be applied to damp wood without performance issues, guaranteeing protection against wet rot, decay, dry rot, and organic growth. Applications this product has excellent in include;
- Perfect for interior and exterior use on rough-sawn or planed timber, including floorboards, roof timbers, joists and window and door frames.
Preparation
Before commencing the application, ensure the surface is clean and free from contaminants that can hinder this product's performance.
Application
- Shake the product thoroughly before use.
- Apply to the wood by spraying, brushing or dipping.
- Apply at least two coats to the surface if brushing or spraying, which should be applied after the first has dried.
- When dipping, you pay particular attention to ensure it's soaked, allowing it to set for at least 3 minutes for optimal results.
Limitations and Notes
- This product is ready to use; do not dilute it.
- Do not allow this product to make contact with bitumen, roofing felt or plastics.
- You can overcoat timber to reduce environmental impact.
- This product is not suitable for application to the surface where food is prepared.
