Freeflow 68mm Round Down Pipe Shoe - White 
Gorilla Super Glue Gel Twin Pack - Clear 3g 
ALM Code 4 Milled Lead - 180mm x 6m 
Ronseal Exterior Yacht Varnish - Gloss 500ml 
ALM Code 3 Milled Lead - 210mm x 6m 
Everbuild Everflex Premium 145 Butyl Rubber Sealant - Grey 300ml 
Roofer Doofer – The Ultimate Roofing Tool 
Timco Pozi C2 Strong-Fix Twin Cut Screws - 4.0mm x 40mm (Box of 200) 
ALM Code 8 Milled Lead - 1600mm x 6m 
Everbuild Febond PVA - 1L 
Bond It Aerosol Spray Adhesive - 500ml Beige 
Code 7 Cast Lead - 1200mm x 6m 
Hambleside Danelaw TV15/7 Tile Vent - Antique Red (Box of 5) 
Samac Aluminium Annular Ring Nails - 1kg (38mm x 3.35mm) 
Bond It Sealant Applicator Tool 
Code 6 Cast Lead - 300mm x 6m 
OX Trade 14 Drive Socket Set - 35 Piece 
Siroflex Trade High Viscosity Superglue - 20g 
Everbuild Bath & Kitchen Sealant - 200ml 
Ronseal Anti-Condensation Paint - Matt White 750ml 
Timloc Plain Tile Vent Terracotta (Box of 14) 
BOND IT Power Mix Concentrated Liquid Mortar Plasticiser - 500ml Brown 
Hambleside Danelaw TV15/4 Tile Vent - Brown (Box of 5) 
Bond It Monster Scrim Drywall Tape - White 48mm x 90m 
YBS SuperQuilt Lite Multi-Layer Quilted Foil Insulation, 1.5m x 10m 
Everbuild Multi-Use Giant Wonder Wipes Tub (300 Wipes) 
Everbuild Mammoth Barrier Tape - Red/White (72mm x 500m) 
ALM Code 6 Milled Lead Flashing - 300mm x 6m 
Easy Prime Porcelain Prime Slurry - 15kg 
Uses
The Wood Preserver by SikaGard is an excellent, high-performance, fast-curing preserver for wood and timber, both internally and externally, with a unique pet and plant-safe formula. Sika's scientists brewed this product with fungicides and algaecides, which finely disperse, allowing deep penetration and, therefore, excellent effectiveness. Another feature is its ability to be applied to damp wood without performance issues, guaranteeing protection against wet rot, decay, dry rot, and organic growth. Applications this product has excellent in include;
- Perfect for interior and exterior use on rough-sawn or planed timber, including floorboards, roof timbers, joists and window and door frames.
Preparation
Before commencing the application, ensure the surface is clean and free from contaminants that can hinder this product's performance.
Application
- Shake the product thoroughly before use.
- Apply to the wood by spraying, brushing or dipping.
- Apply at least two coats to the surface if brushing or spraying, which should be applied after the first has dried.
- When dipping, you pay particular attention to ensure it's soaked, allowing it to set for at least 3 minutes for optimal results.
Limitations and Notes
- This product is ready to use; do not dilute it.
- Do not allow this product to make contact with bitumen, roofing felt or plastics.
- You can overcoat timber to reduce environmental impact.
- This product is not suitable for application to the surface where food is prepared.
