Ronseal Trade Polyurethane Satincoat Varnish - 2.5L 
Bond It Contractors PVA - 1L White 
FloPlast Half Round Gutter 135° - Black 
Everbuild Dual Purpose Foam Cleaner – 500ml (Box of 12) 
Soudal Trade Roof & Insulation Foam Genius - 600ml 
Ronseal Ultra Tough Hardglaze Clear Varnish - 750ml 
Easy-Trim Universal Dry Verge System Black (Box of 50) 
FloPlast Half Round Union Unit - Black 
Bond It All Weather Roofing Compound - Black 5L 
ALM Code 7 Milled Lead - 450mm x 3m 
Everbuild Everflex Contract AC50 Acoustic Sealant & Adhesive - White 380ml 
Easy-Trim Hip Support Tray Accessory Kit 
Thompson's Emergency Roof Seal - Black 1L 
Code 8 Cast Lead - 800mm x 3m 
Easy-Trim Universal Dry Verge System - Brown 
Everflex Premium+ 450 Builders Silicone – Grey 300ml (Box of 25) 
Timloc 1205 Underfloor Vent Horizontal Duct Adapter - 110mm 
Soudal Lead Sheet Sealant 290ml - Grey (Box of 12) 
ALM Code 3 Milled Lead - 450mm x 3m 
FloPlast Side Fix Rafter Bracket 
Cromar Cold Gritting Solution - Black 25 Litres 
Soudal 30 Minute Bond D4 PU Wood Adhesive Liquid – 750g 
Ronseal's EGC Hardener BPO - 30g 
Bond It Rubber Bitumen Emulsion - Black 5L 
Uses
The Soudafoam Gun Gap Filler by Soudal is an exceptional polyurethane expanding foam with fantastic gap-filling and adhesive properties. It can expand to fill hard-to-reach areas, ensuring every crack and crevice is bridged. Its overall composite is freon-free, ensuring no harmful effects on the ozone layer or greenhouse effect. It's typically used in various applications but excels at installing windows and door frames, general cavity filling, sealing openings in roof construction, and using it for acoustic baffles and thermal isolation.
Preparation
All surfaces should be free from dust, dirt, grease, oil, etc. Any organic growth should be treated with a fungicide to remove all spores. It's good practice to use a stiff brush as well to remove any loose debris that may be present.
Application
- Shake the can thoroughly for at least 20 seconds
- Fit the gun adaptor to a suitable PU gun
- Moisten the surfaces you want to fill; this is to aid the curing process
- Spray and fill the hole up to 65%, then allow the expanding foam to build and fill the rest
- Whilst completing all of this, you should regularly shake the can to ensure it's consistently mixed
Limitations and Notes
- It's essential to moisten the surface prior to application to ensure optimal results are achieved.
- If the cavity is significantly large and requires two loads of filling, allow the first to cure and then moisten the surface, applying your second layer subsequently.
