ALM Code 7 Milled Lead - 300mm x 3m 
OX Tuff Carbon Marking Pencil Value Pack 
Ronseal Kitchen & Bathroom Touch-Up Enamel - 10ml 
Timco Copper Disc Rivets 
ERidge Dry Fix Ridge System Black – 6m Kit 
Code 5 Cast Lead - 850mm x 6m 
Timco Assorted Horseshoe Shims - 1.0 to 6.0mm (Box of 400) 
Everbuild Showerproof Bathroom Silicone - Clear 280ml (Box of 12) 
10 x Permavent Black Breather Membrane – 1m x 50m 
Ronseal Multi Purpose Smooth Finish Filler - 2.2Kg 
Soudal Soudatherm Roof 250 - 800ml (Box of 12) 
Ronseal One Coat Stain Block - White 750ml 
Soudal Roof & Gutter Sealant – Black 290ml (Box of 12) 
Soudal Insulating Foam Genius Gun 750ml - Champagne 
Everbuild Lumberjack 30 Minute PU Wood Adhesive Liquid – 750ml (Box of 12) 
ALM Code 6 Milled Lead Flashing - 300mm x 3m 
Code 3 Cast Lead - 510mm x 3m 
Bond It Rubber Bitumen Emulsion - Black 25L 
Everbuild Stainblock - White 400ml 
OX Pro Mortar Spike, 300mm 
Everbuild Professional Sealant Gun – C4 (290 - 380ml) 
OX Pro Harling Trowel - 165mm X 165mm 
Everbuild Tecnic Silicone 825 – Limestone White 380ml (Box of 25) 
SikaGard Wood Preserver - Clear 5 Litre 
Armatool Lead Dresser Set - 5 Piece Set 
Circular Soffit Vent, Brown 
Everbuild Showerproof Bathroom Silicone – White 280ml 
Timloc Interlocking Plain Tile Vent Grey (Box of 12) 
FloPlast Half Round Gutter Angle 135°, Brown – 112mm 
Bond It Mould Stop - Clear 1L 
Everbuild Black Jack 905 All Weather Roof Coating – 5 Litre 
Uses
30 Min D4 Liquid Pu Wood Adhesive Trade by Soudal is a perfect, well-rounded adhesive that enables various applications most other products struggle with. One of these includes the filling characteristic; the foam formation created by this product allows for uneven surfaces to be bonded effectively. This product has fantastic resilience to water, offering applications externally as well as high humidity. This product can bond windows and door frames, including the corner connection.
Preparation
Before commencing the application, prepare the surface by removing any contaminants that can hinder the adhesion. These include dirt, dust, oil, grease and similar impurities. This product doesn't need a primer; however, spraying the surface with a bit of water is suggested. This is due to the adhesive curing when exposed to moisture in the air and will optimise the application.
Application
- Apply the adhesive using a fine-tooth comb or brush, and apply it to one of the materials to be bonded
- Bring the two surfaces together within a maximum of 15 minutes and clamp them down for at least 3 hours
- If you don't clamp it down, you'll risk from poor adhesive results
