ALM Code 8 Milled Lead - 240mm x 3m 
OX Pro Heavy Duty Aviation Snips Straight Cut (Yellow) 
Ronseal Exterior All Surface Primer & Undercoat - White 750ml 
ALM Code 5 Milled Lead - 510mm x 3m 
Easy-Trim End Cap Angled - Black (Box of 10) 
Soudal Soudaduct - Grey 300ml 
Bond It Rain-Mate All Weather Sealant - Black EU3 
FaithFull Soft Grip Chisel - 4 Piece Set 
Hambleside Danelaw Double Pantile Vent TV15/2 - Terracotta (Box of 5) 
Everbuild Quick Drying Clear Varnish - Gloss 250ml 
ALM Code 7 Milled Lead - 914mm x 3m 
Sika Dustproofer – Clear 5 Litre 
Klober Profile-Line Flat Tile Vent - Antique Red KG9856-3-0116 (Box of 10) 
Bora Workhorse XT Adjustable Height Single Piece Stand 
Lead Flexi Slate Pipe Flashing - Pitched 
Restec Flexitec 2020 Roofing Kit - (10m²) 
Soudal Water Stop Roof Repair Compound – Grey 4kg 
Soudal Pro 30D Waterproof Wood Adhesive - 750g 
Everbuild Black Jack 902 Bitumen & Flashing Primer – 1 Litre 
Code 8 Cast Lead - 510mm x 3m 
Bond It Trowel Mastic - Black 2.5L 
Uses
The B1 Trade Expanding Foam by Soudal is an excellent expanding foam, ideal for various applications throughout a building. It's ideal for installing windows and door frames, general cavity filling, and sealing openings in roof construction. It improves thermal isolation in cooling systems and is an excellent versatile gap filler. It offers outstanding adhesion to all surfaces, excluding PE, PP and PTFE.
Preparation
Due to its excellent adhesion properties, minimal preparation is required. Using a stiff brush to remove small debris is good practice, as it focuses on cleaning any dust, grease, and similar impurities. Afterwards, moisten the surfaces to improve the adhesion, and then you can proceed with the application.
Application
- Shake the aerosol for 20 seconds
- Put the adaptor on the valve
- Fill the cavity up to 1/3, allowing the foam to expand and fill the rest
- Repeat shaking the can regularly as you're applying
- If the cavity hasn't filled entirely and needs another application, allow it to cure and slightly moisten it
- Proceed to apply a second load of expanding foam
Limitations and Notes
- Do not apply this product if the temperature isn't between 5°C and 35°C
- Any cured foam can only be removed mechanically.
