Timco Twin-Cut C2 Floor-Fix Screws - 4.2mm x 55mm (Tub of 250) 
Klober Uni-line Vent Slate Grey 
Everbuild Carpet Fix Cloth Tape – 50mm x 25m 
Everbuild 703 Fix & Grout Tile Adhesive - White 750g 
Timloc Single Pantile Tile Vent Brown (Box of 11) 
Code 3 Cast Lead - 914mm x 3m 
ALM Code 7 Milled Lead - 240mm x 3m 
Everbuild Power Pro Sealant Gun - 290 to 380ml (Box of 12) 
Everbuild Glass Protector - Red (600mm x 25m) 
Oxyturbo Oxygen Refill 
Everbuild Ultra Hard Floor Varnish – Clear 2.5 Litre (Gloss) 
Bond It 5 Minute PU Wood Gel Translucent 300ml - Box of 12 
Soudal Trade Gun Grade Expanding Foam - 750ml (Box of 12) 
Bond It Aluminium Foil Tape - 100mm x 45M (Box of 12) 
Everbuild Tecnic Silicone 825 – Limestone White 380ml (Box of 25) 
Code 6 Cast Lead - 210mm x 3m 
Timco Impact Driver Bit Set 
Everbuild Industrial Superglue HV - Clear 50g 
Ulti-Mate Stonewold MkII Roof Tile Vent - Brown 
Easy-Trim Ridge F Universal Dry Ridge System - 10m Kit 
Code 5 Cast Lead - 850mm x 6m 
Everbuild Everflex 115 G.P Building Mastic - Brown 285ml (Box of 25) 
Everbuild Opti-Mix Mortar Plasticiser - 1 Litre (Box of 12) 
Bond It Bitumen Primer - Black 25L 
Uses
ButyBand Flashing Tape by Soudal is an excellent product to seal areas of the roof securely, and it is formed with a high-quality butyl rubber that is protected with a layer of PET-reinforced aluminium. It can fill the connection joints around windows and doors and is suitable on surfaces such as;
- Glass
- Steel
- Plexiglas
- Polycarbonate
- Wood
- Aluminium
- PVC
Preparation
Before you apply this product, ensure that you prepare the surface to guarantee optimal adhesion. Remove any contaminants, including dust, dirt, oil, grease and similar impurities.
Application
Remove the protective foil evenly, pressing firmly onto the application area. Use a firm roller to ensure it's applied correctly and that no air bubbles, folds or other problems occur. This is because it affects this product's ability to adhere and protect against weathering. When overlapping two parts of this product, ensure it's at least 5cm.
Limitations
- Do not apply this product to frozen surfaces or surfaces with condensation.
- This product adheres through the impact of pressure applied, not by the duration. This is why a firm roller will aid in securely bonding the surfaces together.
