FloPlast Half Round Pipe Socket, Brown 
Bulk pallet 125 packs - Classic Multi-Purpose Screws 4.0 x 50 Double Countersunk - A2 Stainless Steel - 200 Box 
Code 6 Cast Lead - 600mm x 3m 
Everbuild Black Jack 903 Bitumen Trowel Mastic – 5 Litre 
ALM Code 8 Milled Lead - 180mm x 6m 
Ronseal Fence Life Brush - 4" 
Ronseal Exterior All Surface Primer & Undercoat - White 750ml 
Code 5 Cast Lead - 210mm x 6m 
ALM Code 3 Milled Lead - 914mm x 6m 
Everflex Premium+ 450 Builders Silicone – Grey 300ml (Box of 25) 
Samac Stainless Steel Cladding Pins - 30mm x 2.0mm (Box of 250) 
Lead Sheet Restorer - G3 
Ronseal Ultimate Finish Interior Floor Pad Kit 
Sika MultiSeal Self Adhesive Bituminous Sealing Tape - (300mm x 10m) 
Everbuild Flue Jointing Compound - 1kg 
Bond It Patio Blaster - Clear 5L 
Soudal Roof & Gutter Sealant – Black 290ml 
Oxyturbo Oxygen Refill 
Ronseal One Coat Stays White Radiator Paint - Gloss 750ml 
Soudal Fix ALL High Tack – White 290ml (Box of 12) 
ALM Code 7 Milled Lead - 850mm x 3m 
Colron Liquid Scratch Cover - Medium 14ml 
Everbuild Tecnic Silicone 825 – Limestone White 380ml (Box of 25) 
Uses
The Genius Gun Plasterboard Adhesive by Soudal is forged to provide effective adhesive. It is stored in a small and economical 600ml aerosol can with a unique Genius Gun attachment, which allows the user to apply the adhesive directly from the can. The patented Genius Gun head by Soudal enables multiple uses, with it viable for up to 6 weeks after its first use. This adhesive is suitable for horizontal and vertical use, with its superior bonding strength holding insulation boards effortlessly.
Preparation
Before commencing the application, you should prepare the surface to ensure the optimal adhesive is achieved. Start by removing any dirt, dust, grease, oil, talcum, organic growth, etc. If any bubbles, cement slurries and sinter layers are present, you must remove them before starting the application.
Application
- Equip protective goggles and gloves and shake the can thoroughly for at least 20 seconds.
- Open the cover, folding the tube perpendicular to the aerosol can
- As you proceed with completing the application, regularly shake the can, ensuring its composite is constantly mixed
- Apply the adhesive to one of the panels you intend to bond
- Bring the surfaces together and apply pressure, allowing the adhesive to cure and bond the surfaces
Limitations and Notes
- After using the product, you must ensure that the valve is cleared of all foam and cleaned to make it reusable.
