Timloc Plain Tile Vent Terracotta (Box of 14) 
Cast Lead Dome Set (Lead Dots) - Pack of 20 
ALM Code 5 Milled Lead - 210mm x 6m 
Bond It Rain-Mate All Weather Sealant - Clear EU3 
FloPlast Square to Round Downpipe Adaptor - Brown 
Spax Pozi Pz3 Drill Bits - 25mm (Pack of 5) 
Code 5 Cast Lead – 650mm x 6m 
Cromar Cold Gritting Solution - Black 5 Litres 
Bond It Duct Tape - Black 48mm x 45M 
Everbuild Firefoam B1 Gun Grade Expanding Foam - Pink 750ml (Box of 12) 
Code 8 Cast Lead - 800mm x 3m 
Ox Pro Ultraflex Finishing Trowel - 16" (405mm x 110mm) 
Code 4 Cast Lead - 1000mm x 3m 
Bond It Contractors PVA - 1L White 
Uses
The Mitre Bonding Kit Superglue Adhesive & Activator by Soudal is an outstanding, high-strength, rapid-curing glue perfect for various horizontal and vertical surfaces. This is achieved through the two-component system, which includes a cyanoacrylate adhesive and an activator. When used in conjunction with one another, this product increases the adhesive's performance and reduces curing times significantly.
Preparation
This product only requires a little preparation, but it's essential to complete it to ensure optimal results are achieved. Ensure all surfaces to be bonded are free from dust and grease.
Application
- Spray one of the surfaces with the activator and apply the adhesive to the other.
- Bring both surfaces together and press for at least one minute to allow it to cure fully.
Limitations and Notes
- After using the products, clean the nozzle to ensure no glue cures inside, and you can re-use it.
- You may use the adhesive without the activator, but curing times will be significantly longer.
