3 x Oxyturbo Oxygen & Gas Refill 
Soudal Construction Silicone, Grey - 290ml 
Everbuild Mammoth Barrier Tape - Red/White (72mm x 500m) 
Code 3 Cast Lead - 150mm x 6m 
OX Pro 5 Piece Wood Chisel Set in Velcro Case 
Code 7 Cast Lead - 1600mm x 3m 
Cromar Bitumen Primer – Black 1 Litre 
OX Pro Small Trowel - 200 x 75mm 
ALM Code 7 Milled Lead - 210mm x 6m 
Everbuild Black Jack 904 Roof Felt Adhesive – 2.5 Litre 
Bostik Flashband Self Adhesive Flashing Tape – Grey 3.75m x 75mm 
Soudal Aquafix All Weather Sealant – Clear 300ml (Box of 12) 
ALM Code 6 Milled Lead Flashing - 240mm x 3m 
Hedgehog Gutter Brush Leaf Guard Black – 4m x 150mm 
Ulti-Mate 10K Slate Vent Adaptor 
ALM Code 3 Milled Lead - 180mm x 6m 
Everbuild Professional Sealant Gun – C4 (290 - 380ml) 
Bond It All Weather Roofing Compound - Black 5L 
Klober Boll Roll Tile Vent KG6085, Brown 
Code 4 Cast Lead - 850mm x 6m 
Soudal Trade PU Construction Adhesive - Beige 290ml 
Bond It Economy Sealant Gun - Blue 400ml (EU3 + EU4) 
Code 5 Cast Lead - 850mm x 3m 
Bond It Rain-Mate All Weather Sealant Black EU3 - Box of 12 
Uses
The Mitre Kit by Soudal is an excellent product that enhances your D.I.Y or Tradey life with exceptional bonding strength and speed. The two-component mitre kit by Soudal securely bonds mitre joints with a superior bond in less than a minute, with the activator component enhancing bonding strength and curing speeds. It's versatile with various substrates and suitable for bonding;
- Wooden mitre joints
- Plastic
- Metal
- Timber
- Porcelain
- Cork
- Leather
- Ceramics
- Cardboard
- Peper
- Rubber
Preparation
Ensure that both surfaces are bonded and sit flush with each other. Alongside that, ensure that it's free from contaminants, including dirt, dust, grease, oil, and anything that can interfere with the bonding.
Application
- Spray one surface with the activator component
- Apply the adhesive to the other surfaces
- Bring the two together and hold firmly for at least 1 minute.
Limitations and Notes
- Any unwanted adhesive that's cured must be removed mechanically
- Using the kit without the activator significantly reduces curing speeds
- After use, clean the nozzle and tube using a needle and close the cap
