Everbuild Stixall Extreme Power – Black 290ml 
Everbuild Everflex Lead Mate Sealant Grey - 295ml (Box of 25) 
ALM Code 8 Milled Lead - 450mm x 3m 
OX Pro Top Steady Nail-On (Veneer) Clamp Set 
SikaFlex EBT+ Polyurethane Adhesive & Sealant, Clear - 300ml (Box of 12) 
Thompson's Patio & Block Paving Seal - Wet Look 5L 
OX Tools Winter Set - Beanie, Socks, Thermal Gloves 
Code 5 Cast Lead - 240mm x 3m 
Code 7 Cast Lead - 850mm x 3m 
Soudal Trade All Weather Sealant - Clear 290ml 
Ronseal Multi Purpose Wood Filler - Natural 930g 
Thompsons One Coat Roof Seal - Black 5L 
Klober Profile-Line Limarech Tile Vent - Slate Grey KG9859-3-0429 (Box of 10) 
OX Tools Pro Combination Square 300mm / 12in 
Everbuild Bath & Kitchen Sealant - 200ml 
OX Pro Dry Wall Internal Corner Trowel - 102mm x 127mm 
Soudal Insulating Foam Genius Gun 750ml - Champagne 
Timco Screwdriver 9-Tool Set 
Easy-Trim Universal Dry Verge System Black (Pallet of 400) 
Permavent Black Breather Membrane – 1m x 20m 
OX Tough Builders Socks (UK 6-11) 
Everbuild Opti-Mix Mortar Plasticiser - 1 Litre (Box of 12) 
Cromar Vent 3 Light Breathable Membrane - 1m x 50m (Full Pallet of 56) 
Sika MaxMix Waterproofer - 1 Litre 
Everbuild KOS Fire Cement Buff – 1kg 
Hambleside Danelaw TV15/7 Tile Vent - Antique Red (Box of 5) 
Bond It SBR Admixture - White 5L 
Ronseal Anti-Bacterial Worktop Oil - Clear 1L 
Uses
The Soudaduct by Soudal is an acrylic polymer-based, plasto-elastic, solvent-free HVAC ducting sealant suitable for sealing every type of metal duct. It offers excellent adhesion on both galvanised and stainless steel, yet remains flexible and can even be painted once it is fully cured, allowing it to fit in with it's surroundings. It's suitable for joints with a movement max of 12.5% and achieves all requirements in DW144 standards and regulations.
Preparation
Before commencing the application, ensure that the surfaces involved in the application are free from dirt, dust, grease, oil, etc; after you've cleaned them, make sure the surface is bone dry.
Application
- Cut the top of the cartridge, taking care not to damage the threaded screw.
- Cut the nozzle at a 45° angle with an opening slightly larger than the gap to be filled.
- Place it into a suitable sealant applicator tool and apply the material to the surface.
- Smooth it down using a smoothing tool, putty knife, etc, to a smooth finish.
- Ensure that all gaps, cracks and areas of the duct system are sealed to ensure an airtight system.
Limitation and Notes
- Do not apply this product in areas subject to constant water immersion.
- This product is suitable for painting, but preliminary tests must be completed to ensure compatibility before finishing the full job.
- Allow the sealant to cure for 12-24 hours before using the air system.
- This product is not suitable for external use.
