Ronseal One Coat Damp Seal - White 250ml 
Hambleside Danelaw TV15/7 Tile Vent - Black (Box of 5) 
Ronseal Diamond Hard Floor Varnish - Clear Satin 5L 
Bond It Aluminium Foil Tape - 75mm x 45M (Box of 16) 
Soudal Gun & Foam Cleaner Gun Grade - 500ml 
Bond It B1 Fire Resistant PU Aerosol Expanding Foam - Pink 750ml 
ALM Code 8 Milled Lead - 450mm x 6m 
Code 7 Cast Lead - 1000mm x 3m 
Code 6 Cast Lead - 360mm x 6m 
Everflex Galva Mate Duct Sealant - C3 
Everbuild Heat Mate Silicone Sealant - Red 295ml (Box of 12) 
ALM Code 3 Milled Lead - 510mm x 3m 
Soudal Fix ALL Turbo - White 290ml 
Code 8 Cast Lead - 1000mm x 3m 
ALM Code 5 Milled Lead - 850mm x 6m 
Everbuild Maximum Torque - White 290ml (Box of 12) 
Ronseal uPVC Paint - Black Satin 2.5L 
Restec GRPROOF 1010 Top Coat Resin - 20kg 
OX Spectrum Trade XL Mortar Raking Diamond Blade 115/22.23mm 
Cromar Bitumen Primer – Black 5 Litre 
ALM Code 7 Milled Lead - 360mm x 6m 
ALM Code 4 Milled Lead - 450mm x 6m 
Bond It B2 Expanding PU Gun Grade Foam - Beige 750ml 
Uses
The Trade Roof & Insulation Foam Genius is a convenient and superb product that provides outstanding polyurethane expanding foam delivered in a reusable container. The Genius Gun cap allows multiple uses out of the same can without concerns of clogging, allowing endless use. The product's formula is unrivalled, providing excellent value and thermal and acoustic insulation that's entirely freon-free. It's elastic, compressible, fast curing and suitable for use onto most common surfaces except PE, PP and PTFE.
Preparation
Due to the nature of this product, its expanding properties and excellent adhesion allow it to fill voids effectively. However, brushing the area is a good practice, as it removes any organic growth, small debris, dust, or grease.
Application
- Shake the can thoroughly for at least 20 seconds
- Open the cover and fold the tube perpendicular to the can
- Slightly moisten the surfaces with a water spray
- Fill the 1/3 of the void, allowing the expanding foam to fill the rest
- Ensure as you continue applying, you continue to shake the can in intervals
- If you're applying in layers, allow the one prior to cure, slightly moisten the surface and apply another layer on top
Limitations and Notes
- Any cured expanding foam must be removed mechanically.
- Uncured expanding foam can be wiped away with a wet cloth.
- Slightly moistened surfaces enhance curing, adhesive, and yield.
