ALM Code 7 Milled Lead - 450mm x 6m 
Everbuild Forever Grey Silicone Sealant – 295ml 
ALM Code 5 Milled Lead - 240mm x 3m 
Everbuild Firefoam B2 Gun Grade - Pink 750ml 
Code 8 Cast Lead - 914mm x 6m 
Code 6 Cast Lead - 240mm x 6m 
Ronseal Stays White Ultra Tough White Satin Paint - 2.5L 
Bond It Rain-Mate All Weather Sealant - Black EU3 
Code 5 Cast Lead - 914mm x 6m 
OX Pro Grout Remover 
Timco Chalk Line Set 
Timloc Universal Roof Slate Vent + Adaptor kit 
Easy-Trim Lead R Flashing Smooth – 300mm x 5m 
Everbuild Forever Grey Silicone Sealant – 295ml (Box of 12) 
Cromar Vent 3 Classic Breathable Membrane - 1.5m x 50m 
FaithFull Soft Grip Chisel - 4 Piece Set 
ALM Code 8 Milled Lead - 150mm x 6m 
Sika MultiSeal Self Adhesive Bituminous Sealing Tape - (300mm x 10m) 
Timco Pozi C2 Strong-Fix Twin Cut Screws - 4.0mm x 40mm (Box of 200) 
Ronseal Stays White 2in1 Paint & Primer - Satin 750ml 
Armatool Mop Heads Size 12 
Bond It Duct Tape - Silver 48mm x 45M 
Freeflow 112mm Round Gutter System Running Outlet - Black 
Klober Universal Tile Vent Antique Red KG9854 (Box of 10) 
Everbuild Forever White Silicone Sealant – 295ml (Box of 12) 
Everbuild Opti-Mix 3-in-1 Render Additive – 1 Litre 
Uses
One Coat Waterseal by Thompson's offers excellent benefits for your brickwork, concrete or stone surface. It has a unique formula created from water-based, alkyl polysiloxane resin, delivering optimal substrate penetration. After application, water cannot damage the surface, and the resin combats the water, preventing it from seeping in and causing damage. The substrates you can apply this product include;
- Stone
- Concrete
- Brick
Preparation
Prepare the surface by brushing it with a stiff bristle brush, and any crack must be filled. Also, complete any pointing repairs required.
Application
- Give the tin a thorough shake.
- Apply using a brush or roller.
- Apply directly to the surface, and work from the bottom upwards if it is a vertical wall. Ensure you work in 1-metre sections to cover the area entirely.
- Ensure you coat the full area, mortar lines, and isolated areas, not just the walls.
Limitations
- Do not apply this product if the temperature in the air and surface is below 10°C
- This product is unsuitable to apply if it is raining or rain is imminent during the drying process.
- Do not use over masonry paint or on pre-painted surfaces.
- Some substrates may darken when treated.
- Do not use detergent to clean the surface that is being treated.
- This product should not be applied onto asphalt, synthetic fibres, plastics, natural rubber or wood.
- Ensure the application area is well-ventilated and prevent the product from frost.
- This product is only suitable for external use. Do not apply on floors, patios, ponds, roofs, garden retaining walls, below ground and damp-proof membranes where positive water pressure is likely.
