ALM Code 7 Milled Lead - 300mm x 3m 
OX Tuff Carbon Marking Pencil Value Pack 
Ronseal Kitchen & Bathroom Touch-Up Enamel - 10ml 
Timco Copper Disc Rivets 
ERidge Dry Fix Ridge System Black – 6m Kit 
Code 5 Cast Lead - 850mm x 6m 
Timco Assorted Horseshoe Shims - 1.0 to 6.0mm (Box of 400) 
Everbuild Showerproof Bathroom Silicone - Clear 280ml (Box of 12) 
10 x Permavent Black Breather Membrane – 1m x 50m 
Ronseal Multi Purpose Smooth Finish Filler - 2.2Kg 
Soudal Soudatherm Roof 250 - 800ml (Box of 12) 
Ronseal One Coat Stain Block - White 750ml 
Soudal Roof & Gutter Sealant – Black 290ml (Box of 12) 
Soudal Insulating Foam Genius Gun 750ml - Champagne 
Everbuild Lumberjack 30 Minute PU Wood Adhesive Liquid – 750ml (Box of 12) 
ALM Code 6 Milled Lead Flashing - 300mm x 3m 
Code 3 Cast Lead - 510mm x 3m 
Bond It Rubber Bitumen Emulsion - Black 25L 
Everbuild Stainblock - White 400ml 
OX Pro Mortar Spike, 300mm 
Everbuild Professional Sealant Gun – C4 (290 - 380ml) 
OX Pro Harling Trowel - 165mm X 165mm 
Everbuild Tecnic Silicone 825 – Limestone White 380ml (Box of 25) 
SikaGard Wood Preserver - Clear 5 Litre 
Armatool Lead Dresser Set - 5 Piece Set 
Circular Soffit Vent, Brown 
Everbuild Showerproof Bathroom Silicone – White 280ml 
Timloc Interlocking Plain Tile Vent Grey (Box of 12) 
FloPlast Half Round Gutter Angle 135°, Brown – 112mm 
Bond It Mould Stop - Clear 1L 
Uses
The Water Seal by Thompson offers excellent surface protection due to its unique advanced formula. Thompson brewed this formula with a combination of alkyl polysiloxane resin and hydrophobic waxes, offering outstanding water protection. This product is designed to go on surfaces such as;
- Brick
- Mortar
- Concrete
- Stone
Preparation
Before application, give the surface a thorough scrub with a stiff bristle brush, and if any cracks are present, fill them in and do any pointing repairs required.
Application
- Give the tin a good shake
- Using a brush or roller, apply to the wall working at 1-metre sections, applying from the bottom upwards
- Once you've completed the first section, move on to the next, working from the bottom upwards
- Ensure you coat mortar lines and cover the whole wall, including isolated areas.
- Once the first coat has dried (average 2 hours, depending on the surface), apply the second coat.
Limitations
- Do not apply this product if the air or surface temperature is below 10°C
- If rain it is raining or imminent during the application and drying time, do not apply this product.
- This product is unsuitable for masonry paint or other pre-painted surfaces.
- Some substrates may darken when treated.
- Detergent should not be used to clean the surface which is being protected.
- This product is unsuitable for application on surfaces such as asphalt, synthetic fibres, plastics or natural rubber.
- This product is not suitable for application on wood.
- During application, ensure the environment is well-ventilated.
- This product is for external use only. Do not apply on floors, patios, ponds, roofs, garden retaining walls, below ground and damp-proof membranes where positive water pressure is likely.
