Ronseal One Coat Water-Based Tile Paint - Granite Grey Satin 750ml 
Everbuild Glass Protector - Red (600mm x 25m) 
OX Pro Mortar Spike, 300mm 
Ronseal Quick Drying Radiator Spray Paint - White Satin 400ml 
Samac Half Round Snowguard Bracket - 225mm (9") 
Code 6 Cast Lead - 510mm x 6m 
Evo-Stik Gripfill Extra Multi-Purpose - Buff 350ml 
Ronseal One Coat Stain Block - White 750ml 
Bond It Barrier Tape Red and White - 70mm x 500M 
Klober Universal Tile Vent Antique Red KG9854 (Box of 10) 
Siroflex Painters Caulk-It - 380ml 
Soudal Construction Silicone, Grey - 290ml (Box of 12) 
Armatool Slate Rip, Forged Steel 
Soudal Window & Door Expanding Foam - Genius Gun Max 600ml Champagne 
Soudal Decorators Caulk – White 290ml (Box of 24) 
Freeflow 65mm Square Gutter Drain Pipe 112° Branch - White 
Everbuild Everflex Contract AC50 Acoustic Sealant & Adhesive - White 380ml 
Everbuild Multi-Use Monster Wonder Wipes Tub (500 Wipes) 
Ronseal Super Flexible Smooth Finish Filler - 330g 
Soudal Adhesive Remover - 400ml 
Everbuild Multi-Use Wonder Wipes Tub (Box of 12) 
Ox Tools Spectrum Superior Diamond Blade 115/22.23mm 
Easy Prime Porcelain Prime Slurry - 15kg 
Bond It Trowel Mastic - Black 1L 
Soudal Trade PU Construction Adhesive - Beige 290ml 
ALM Code 4 Milled Lead - 914mm x 6m 
Everbuild Stixall Extreme Power – Grey 290ml 
Everbuild 501 PVA - 5 Litre 
Bostik Flexacryl Instant Repair Waterproofing - Grey 5kg 
Uses
The Water Seal by Thompson offers excellent surface protection due to its unique advanced formula. Thompson brewed this formula with a combination of alkyl polysiloxane resin and hydrophobic waxes, offering outstanding water protection. This product is designed to go on surfaces such as;
- Brick
- Mortar
- Concrete
- Stone
Preparation
Before application, give the surface a thorough scrub with a stiff bristle brush, and if any cracks are present, fill them in and do any pointing repairs required.
Application
- Give the tin a good shake
- Using a brush or roller, apply to the wall working at 1-metre sections, applying from the bottom upwards
- Once you've completed the first section, move on to the next, working from the bottom upwards
- Ensure you coat mortar lines and cover the whole wall, including isolated areas.
- Once the first coat has dried (average 2 hours, depending on the surface), apply the second coat.
Limitations
- Do not apply this product if the air or surface temperature is below 10°C
- If rain it is raining or imminent during the application and drying time, do not apply this product.
- This product is unsuitable for masonry paint or other pre-painted surfaces.
- Some substrates may darken when treated.
- Detergent should not be used to clean the surface which is being protected.
- This product is unsuitable for application on surfaces such as asphalt, synthetic fibres, plastics or natural rubber.
- This product is not suitable for application on wood.
- During application, ensure the environment is well-ventilated.
- This product is for external use only. Do not apply on floors, patios, ponds, roofs, garden retaining walls, below ground and damp-proof membranes where positive water pressure is likely.
