ALM Code 6 Milled Lead Flashing - 1600mm x 6m 
ALM Code 5 Milled Lead - 914mm x 6m 
ALM Code 4 Milled Lead - 800mm x 6m 
Cromar Vent 3 Light Breathable Membrane - 1m x 50m (Full Pallet of 56) 
Samac Copper Wire Coil 36m x 2mm 
FloPlast Half Round Stop End Outlet, White – 112mm 
10 x Timloc 3014C Over Fascia Ventilation System 1M - Black 
Bostik Flashband Self Adhesive Flashing Tape – Grey 3.75m x 75mm 
Code 3 Cast Lead - 800mm x 3m 
Timco Carpenter’s Speed Auger & Flat Wood Bit Kit 
Permavent Easy Slate 600 - Pack of 20 
OX Pro Impact Drill & Drive Accessory Set - 40 Piece 
Code 7 Cast Lead - 1600mm x 6m 
Timco Screwdriver 9-Tool Set 
Soudal Brake Cleaner - 400ml 
Ronseal Diamond Hard Floor Varnish - Clear Gloss 2.5L 
FloPlast Square Line Shoe Black – 65mm 
Bostik Flexacryl Black – 5kg 
Everbuild Bath & Kitchen Sealant - 200ml 
Everbuild Black Jack 902 Bitumen & Flashing Primer – 5 Litre 
Everbuild 501 PVA - 1 Litre 
Easy-Trim Lead R Flashing Textured – 150mm x 5m 
Everbuild Everflex 200 Contractors LMA Silicone - Black 295ml Patination Oil
Best Sellers
-
Soudal Mitre Bonding Kit Superglue Adhesive & Activator – (Box of 24)
£82.90 Incl VAT £69.08 Excl VAT Read more -
Bond It Brick & Patio Cleaner – Clear 2.5L
£6.99 Incl VAT £5.83 Excl VAT Read more -
Ronseal Precision Finish Brush – 2 Inch
£8.99 Incl VAT £7.49 Excl VAT Add to basket -
Code 6 Cast Lead – 1600mm x 3m
£411.26 Incl VAT £342.72 Excl VAT Add to basket -
Hambleside Danelaw TV10/6 Flush Fit Tile Vent
From: £25.99 Incl VAT £21.66 Excl VAT Select options This product has multiple variants. The options may be chosen on the product page -
Bulk pallet 125 packs – Classic Multi-Purpose Screws 4.0 x 50 Double Countersunk – A2 Stainless Steel – 200 Box
£1,455.00 Incl VAT £1,212.50 Excl VAT Add to basket
Frequently Asked Questions (3)
When lead comes into contact with moisture and rainwater, patination oil prevents it from oxidising, maintaining a uniform and eye-pleasing appearance.
Yes, but it should be thoroughly cleaned with a restorer before any oil is applied.
For a long-lasting effect that has economical and aesthetic benefits, we'd say using patination oil is a necessity.
Patination Oil
Patination oil lead mate flashing protection coating helps prevent unsightly white staining on newly fixed lead work. At ERoofing, we stock various sizes of patination oil, including 500ml and 1 litre.Â
Applying Patination Oil and Using it on Lead
Before using patination oil, you should shake the container actively for about 2 minutes. Then apply one coat only to the lead surface with a soft, clean cloth. Next, work across the lead surface, using the Patination Oil from top to bottom of the installation in straight, vertical lines. Don’t apply in a circular motion, as this will leave an uneven appearance. Remember to apply oil to the underside of leadwork’s leading edges and cover lead clips and fixings. Leave for at least one hour to dry.
We recommend applying patination oil quite rapidly after installing lead, preferably before the end of the day of the original instalation. This avoids the carbonation.
Protecting Old Lead with Patination Oil
Old lead can have patination oil applied to it, but first you must make sure to clean and restore lead it to its original-like state. It’s vital to clean off and dust or dirt before you apply any oil.
Buying Patination Oil from ERoofing
At ERoofing, patination oil comes with free next day delivery. We recommend using it only in well-ventilated areas, away from naked flames and ignition sources. If you have more questions about lead flashing or patination oil, get in touch with our team, and we’ll help out.
