Ronseal Quick Drying Smooth Finish Filler - 600g 
Roughneck® Gorilla Bar Twin Pack - 35cm & 55cm (14in & 22in) 
Everbuild Everflex Fire Mate Intumescent Sealant – 295ml (Box of 25) 
Code 7 Cast Lead - 450mm x 6m 
Ronseal Ultimate Finish Interior Floor Applicator Refill Pads 
Code 3 Cast Lead - 210mm x 3m 
Everbuild Gun A Nail Standard – White 310ml 
ALM Code 6 Milled Lead Flashing - 600mm x 6m 
Bond It Bath Mate Bath & Kitchen Sealant - White EU3 Box of 25 
Ronseal's EGC Hardener BPO - 30g 
Everbuild P45 Foam Applicator Gun 
Everbuild Jetcem Deep Rapid Repair Sand & Cement – 2kg 
Code 5 Cast Lead - 210mm x 3m 
Cromar Cromaprufe - Black 5 Litre 
ALM Code 7 Milled Lead - 390mm x 3m 
OX Pro Top Steady Nail-On (Veneer) Clamp Set 
Bond It Aluminium Foil Tape - 75mm x 45M 
Timco 65 x 3.75 Galvanised Clout Nails - 1kg 
Samac Aluminium Clout Nails - 50mm x 3.35mm 10kg Box 
Everbuild Pinkgrip Adhesive Solvent Based – 350ml 
Bond It Rubber Bitumen Emulsion - Black 5L 
Evo-Stik Roof & Gutter Sealant Black – 290ml 
FloPlast Round Line Downpipe Clip, Black 
Armatool Stripping Spade 
Hambleside Danelaw Double Plain Tile Vent, TV10/9 - Terracotta (Box of 5) 
Easy-Trim Lead R Flashing Smooth – 600mm x 5m 
Restec CSM Fibreglass Roll 450g/m² - (30m² Roll) 
Ronseal Super Flexible Smooth Finish Filler - 300ml 
Bond It B2 Expanding PU Gun Grade Foam - Beige 750ml 
Everbuild Stixall Extreme Power – Grey 290ml 
OX Pro Tuff Rule - Cyan Patination Oil
Best Sellers
-
OX Pro Impact Drill & Drive Accessory Set – 40 Piece
£34.99 Incl VAT £29.16 Excl VAT Add to basket -
Colron Refined Wood Dye – 500ml
From: £15.99 Incl VAT £13.33 Excl VAT Select options This product has multiple variants. The options may be chosen on the product page -
12 x Cromar Vent 3 Pro Breathable Membrane 1m x 50m
£576.00 Incl VAT £480.00 Excl VAT Add to basket -
Timco Pozi Double Countersunk Solo Woodscrew – Various Sizes
From: £8.99 Incl VAT £7.49 Excl VAT Select options This product has multiple variants. The options may be chosen on the product page -
ALM Code 3 Milled Lead – 1600mm x 6m
£407.81 Incl VAT £339.84 Excl VAT Add to basket -
OX Polyzip Flex C2 Cutter – 25mm to 55mm
£22.99 Incl VAT £19.16 Excl VAT Add to basket
Frequently Asked Questions (3)
When lead comes into contact with moisture and rainwater, patination oil prevents it from oxidising, maintaining a uniform and eye-pleasing appearance.
Yes, but it should be thoroughly cleaned with a restorer before any oil is applied.
For a long-lasting effect that has economical and aesthetic benefits, we'd say using patination oil is a necessity.
Patination Oil
Patination oil lead mate flashing protection coating helps prevent unsightly white staining on newly fixed lead work. At ERoofing, we stock various sizes of patination oil, including 500ml and 1 litre.Â
Applying Patination Oil and Using it on Lead
Before using patination oil, you should shake the container actively for about 2 minutes. Then apply one coat only to the lead surface with a soft, clean cloth. Next, work across the lead surface, using the Patination Oil from top to bottom of the installation in straight, vertical lines. Don’t apply in a circular motion, as this will leave an uneven appearance. Remember to apply oil to the underside of leadwork’s leading edges and cover lead clips and fixings. Leave for at least one hour to dry.
We recommend applying patination oil quite rapidly after installing lead, preferably before the end of the day of the original instalation. This avoids the carbonation.
Protecting Old Lead with Patination Oil
Old lead can have patination oil applied to it, but first you must make sure to clean and restore lead it to its original-like state. It’s vital to clean off and dust or dirt before you apply any oil.
Buying Patination Oil from ERoofing
At ERoofing, patination oil comes with free next day delivery. We recommend using it only in well-ventilated areas, away from naked flames and ignition sources. If you have more questions about lead flashing or patination oil, get in touch with our team, and we’ll help out.
